Anybody know? I don't have my bike here right now. Hoping someone could go out to their's and measure the diameter just off the can.

Thanks in advance

whould it help if I told you it was less than three inches?

Quote from: davipuwhould it help if I told you it was less than three inches?

Getting a little too personal around here  

hey it's cold, and I was swimming....

Its like 2 and a 3/64th or some like that ... now it necks down to 1 and 7/8th at the weld ...  :x ... nightmares man ... my nightmares feature the 01+ pipes ... Shudder....
Cool.
Srinath.

hey John we are talking about diameter here,  FYI I may not be able to hit the bottom of a tuna can but I sure can bang the shaZam! outta the sides.

TUNA-CAN DAVIPU

The diameter just off the can on the 2004 GS500F is about 2".  When I get home later I can probably send you the measurements along most of the length.  I am working with Srinath on a slip on for mine.  We've been down this road quite a bit.  We tried a stocker with 2" pipe from another bike and that wasn't quite working.  Then we cut closer to the header pipe, where it necks down to about 1.75".  We are about 99% there.  I have the slip on and am going to sand and paint (with semi-flat black hi temp engine paint) it tonight and mount it over the weekend.   Srinath did a great job.  Will have more info later.

Cool, I was curious. I just got my wileyco exhaust from Dennis Kirk and plan on doing the same thing. I have already made a gasket bracket and needed to know what size pipe needs to welded on it to fit to the stock pipe.

Just finished posting my mod and pics at:

http://gstwins.com/forum/viewtopic.php?t=14108

Scott