for 01+ I found 2 errors in the FAQ

first...the allen screws are M4X0.7X12mm
NOT M4X10X1/2"long

second...the Main jet part number is wrong
I bought the main jets according to the FAQ but it looks NOTHING like the stock ones...wont even fit...

I've added your info and some more that I had on my site, and in my PMs.

i dont know about pn# but the suzuki shop triyed to sell me some hex head jets, then said i didnt know what i was doing.    i did get the right jets from a NON dealer shop.   why are dealers so fricken stupid.

I have an 04, that part# was correct for me. Worked fine.

can anyone post a pic of the new main jets?

Mid and Main Jets


Pilot Jets

mine looks ~the same...

but it's too small to fit in the hole...

it's SMALL ROUNDS right?

Yep!

and it fits right in? :dunno:

No problems when I did mine. Took the 3 jets out and put the 3 new ones in.

question:

does the TOP part of the main jet screw off??

the part above the Hex shaft...

Nothing would screw off of the ones I got, all one piece.

but it's so small compared to the stock ones...

Can you post a pic of the ones you got compared with your stock ones?

well...the stock ones are exactly the ones in teh FAQ...
it's about 4cm long with a 2cm hex barrel

the ones i got are like the ones you posted...(same same and approx size of the mids)

the reason i'm so confused is because tis' teh right part number...and same shape...but its' too small to be screwed into the hole...

(does it stick out after you screw it in?)

Can't remember if it stuck out or if it was countersunk.  That 4cm long one that is stock, does the top of it look like your new jet, if so, will it unscrew from the bottom 2.5-3cm hex shaped part?

yes...my new jets look like the top of stock
yes...it will unscrew out

but its too small to screw back in

OK what exactly are you having trouble with ... mains ...
You are supposed to put the mains in that hex tube and screw that into the carb. heck you're supposed to leave the hex in the carb ... put a wrench on it and unscrew just the jet.
Cool.
Srinath.

"question:

does the TOP part of the main jet screw off??

the part above the Hex shaft..."

that's what i said!!

so i was right...thanks!!!...so the hex part stays on the carb and i unscrew the top part right???

Yep, and screw the new one onto the hex shaft.