Ok guys I need a bit of help here before something royally screws up.

My CCT cover seems to have vibrated off.  Now the big question is this.  The spring doesn't seem to have come out of the casing, so is the cam chain likely to still be tensioned properly?  If so does anyone know what the size and thread pitch is for the small screws holding the cover on?

Fortunately I just put the lunchbox on and was checking the plugs to see how far off jetting was and noticed it.  Boy that lunchbox frees up alot of space in there!  

Anyway...Do I need to check the timing? or can I assume it's ok, put the cover back on with some blue threadlock and call it a day?

If the timing was off, you would have already known.

Stock screw: 10x4x0.7 mm

Thanks!  I figured I woulda gotten a big signal if it was off Just wanted to be sure.  

This thing vibrates screws loose almost as fast as the SV.

Use a little lock tight on the threads or a dab of silicone sealant on the head. I normally replace the phillips screws with allen head screw and safety wire them.