News:

The simplest way to help GStwin is to use this Amazon link to shop

Main Menu

Cleaning K&N drop in filter...

Started by domas, June 26, 2006, 09:36:27 PM

Previous topic - Next topic

domas

Hi,

i have difficulties finding K&N special filter oil in my area. Can i use other brand filter oil? Or is it very special and other oils will eat my filter ? :)

And i should clean the filter with petrol first right?
'02 GS500 Yellow, Mods: K&N drop in w/o restrictor, BSM full exhaust, 132.5/60/17.5 (e-clip @ 4), progressive springs, katana rear shock ('01), fenderoctomy,  sleek mirrors, loud dual automotive horn, warmed grips(home made), SS front brake line.

ashman

Any "reuseable filter oil" stuff should work fine. I use gas to clean mine also, some say dish soap works fine, others gas. Recently I used gas to nock off the nasty stuff, then detergent to finish the job.
g'luck.

-ash
Proud owner of a Bandit 600S former owner of a 93 GS500E

makenzie71

for a fiber filter like the kn fuel or diesel will work fine..but be sure to wash with dish-soap right after.

Personally, I use WD40 for oiling the filters.

domas

Why is the dish-soap for? Is gas harmful if left to dry on a filter?

Also how much do i have to oil the filter? does it have to be soaking or not so much? How do you guys identify it is enough oiled?
'02 GS500 Yellow, Mods: K&N drop in w/o restrictor, BSM full exhaust, 132.5/60/17.5 (e-clip @ 4), progressive springs, katana rear shock ('01), fenderoctomy,  sleek mirrors, loud dual automotive horn, warmed grips(home made), SS front brake line.

makenzie71

fuels are corrosive to petroleum based products...like the rubber compounts used to hold the filters together.

I just give thefilter a good spray...you can't over-oil.

domas

'02 GS500 Yellow, Mods: K&N drop in w/o restrictor, BSM full exhaust, 132.5/60/17.5 (e-clip @ 4), progressive springs, katana rear shock ('01), fenderoctomy,  sleek mirrors, loud dual automotive horn, warmed grips(home made), SS front brake line.

werase643

want Iain's money to support my butt in kens shop

makenzie71

Not dirt bikes with K&N's.  These aren't unifilters that suck oil up like a sponge.

scottpA_GS

Anyone else use WD40 ? You sure thats a good option ? Will it also be fine to use on the Lunch box type K&N?


~ 1990 GS500E Project bike ~ Frame up restoration ~ Yosh exhaust, 89 clipons, ...more to come...

~ 98 Shadow ACE 750 ~ Black Straight Pipes ~ UNI Filter ~ Dyno Jet Stage 1 ~ Sissy Bar ~


galahs

I have used canola oil on my cars K&N.

Less destructive on the natural cotton fibres.



K&N recommend you use a mild detergent to clean them. I'm not sure kero, diesel or petrol is a good idea?

The Buddha

I clean it with dish washing liquid ... and spray lemon pledge on it ... or plain pledge ... same difference ...  O0
Cool.
Srinath.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

LimaXray

i got the little k&n filter charger kit from walmart... it's like $10 and will clean and oil it a bunch of times
'05 GS500 : RU-2970 Lunchbox : V&H Exhaust : 20/65/145 : 15T : LED Dash : Sonic Springs : Braided Front Brake Line : E conversion with Buell Dual Headlight : SW-Motech Engine Gaurds ...

ets_gs500f2004

i spray the k&n filter cleaner then rinse it with water........ let it dry then use the k&n air filter lube it will last longer
gs500 rocks

SMF spam blocked by CleanTalk