You can skip me, i dont need it anymore.

Quote from: bargovic on August 21, 2006, 07:42:40 PM
You can skip me, i dont need it anymore.

Can you send it to me. US Priority mail? I will PM you my address. Thank you.

Chuck is next in line...then rangerbown...so after them I guess you would be next on the list.

Can you add me onto the list too.

Quote from: un1261 on August 22, 2006, 02:53:02 AM
Chuck is next in line...then rangerbown...so after them I guess you would be next on the list.

If you send it before Sept 1, go ahead and send it to rangerbrown first.  I won't have time.  That makes more geographic sense, too.  For that matter, slide tussey in before me, too to finish up the southern tour then it can come up north.

That would make the list (as far as I can tell):

0) un1261 (Beaufort, SC) (currently has it)
1) rangerbrown (Columbia SC)
2) tussey (Orlando FL)
3) Chuck (Albany NY)
4) domahmegok (Boston MA)

Okay who do I send this to...Rangerbown or Tussey?

not me i should be at the bottom of the list, after every one i still dont need it.

Quote from: un1261 on August 22, 2006, 04:41:11 PM
Okay who do I send this to...Rangerbown or Tussey?

I believe rangerbrown wants to be at the BOTTOM of the list so you should send it to tussey

1) tussey (Orlando FL)
2) Chuck (Albany NY)
3) domahmegok (Boston MA)
4) rangerbrown (Columbia SC)

 
Sent to Tussey

seshadri_srinath
should be befor me

Quote from: un1261 on August 22, 2006, 04:41:11 PM
Okay who do I send this to...Rangerbown or Tussey?

OK how did I get bumped off this list.
After you it was me.
Not only did Rangerbrown bump me, so did everyone else.
Send it to me ... who ever has it.
Look at page 40 and 41.
Anyone wants to come over and use it when I have it, please come over.
Cool.
Srinath.

Quote from: Chuck on August 22, 2006, 11:45:43 AM

Quote from: un1261 on August 22, 2006, 02:53:02 AM
Chuck is next in line...then rangerbown...so after them I guess you would be next on the list.

If you send it before Sept 1, go ahead and send it to rangerbrown first.  I won't have time.  That makes more geographic sense, too.  For that matter, slide tussey in before me, too to finish up the southern tour then it can come up north.

That would make the list (as far as I can tell):

0) un1261 (Beaufort, SC) (currently has it)
1) rangerbrown (Columbia SC)
2) tussey (Orlando FL)
3) Chuck (Albany NY)
4) domahmegok (Boston MA)

This should have had me in front of Rangerbrown. Now if Tussey has it, please send it to me when you're done. BTW exhaust bolt - what happened there tussey.
The list is this -

1) tussey (Orlando FL) - Currently has it.
2) Srinath (charlotte NC)
3) Chuck (Albany NY)
4) domahmegok (Boston MA)

Quote from: seshadri_srinath on August 29, 2006, 08:29:35 AM
OK how did I get bumped off this list.
After you it was me.
Not only did Rangerbrown bump me, so did everyone else.

You never added yourself to the list, Srinath.  (Okay, you did say "me, me!" but the list was reposted from the previous list, which I think is an honest mistake.  It takes forever to read all the posts and figure out what the list is supposed to be, it's easier to go to the previous list and make the change.)

Also, you removed rangerbrown from the list.  I don't know if that was revenge or what, but I'll just post the updated list.

1) tussey (Orlando FL) - Currently has it.
2) Srinath (charlotte NC)
3) Chuck (Albany NY)
4) domahmegok (Boston MA)
5) rangerbrown (Columbia SC)

Oh - I dunno, I think rangerbrown is squatting ... sorta for a bike that may need it at a later time. Its cool, but he keeps appearing on the list several times ... but I forgot/confused no revenge.
RB - You're welcome to show up with the GS and have its issues sorted out. Jetting and valves ...  ...
Cool.
Srinath.

I'm done with the kit. Srinath, PM me your address and I will send it out.

The kit is kinda in rough shape. Feeler gauges are pretty bent up. I didn't use the caliper, I used my own personal micrometer. but the vavle depressor tool is still good and there are plenty of shims.

Well one of my exhaust valves (the same exhaust port with the sheared bolt) was tight by .1mm so I fixed it, and now the bike doesn't start. Sounds like the engine is siezing or something. Turns over and over without spark plugs but once I put the sparkplugs in the enginer turns over maybe once or twice then stops. I suspect a bent valve so off to the shop she goes. Also gonna have them remove my header bolt that is stuck  I don't know enough to mess with my engine.

Shipped  to Srinath

good luck 

I was hoping to be added to the list.... I hope this is the right way to do it:

1) tussey (Orlando FL) - Currently has it.
2) Srinath (charlotte NC)
3) Chuck (Albany NY)
4) domahmegok (Boston MA)
5) rangerbrown (Columbia SC)
6) EdChen (Champaign/Urbana, IL) 

Quote from: EdChen on September 08, 2006, 01:57:38 PM
I was hoping to be added to the list.... I hope this is the right way to do it:

1) tussey (Orlando FL) - Currently has it.
2) Srinath (charlotte NC)
3) Chuck (Albany NY)
4) domahmegok (Boston MA)
5) rangerbrown (Columbia SC)
6) EdChen (Champaign/Urbana, IL) 

nope i will bump you up one then i will be last buy then i should have 25k on the bike and will need to check them again soooo its now

1) tussey (Orlando FL) - Currently has it.
2) Srinath (charlotte NC)
3) Chuck (Albany NY)
4) domahmegok (Boston MA)
5) EdChen (Champaign/Urbana, IL)
6) rangerbrown (Columbia SC)

Its here - booya. Just in time for my GStwin southern states gathering and bash. Where there will be more than 1 Gstwin.
Cool.
Srinath.

So howsabout coming to MA and doing my valves?