News:

Registration Issues: email manjul.bose at gmail for support - seems there is a issue that we're still trying to fix

Main Menu

Oil Leakage

Started by BaoQingTian, September 08, 2006, 01:37:42 PM

Previous topic - Next topic

BaoQingTian

I laid my bike down 2 weeks ago, and changed the oil 1 week ago.  I did my first spirited ride today (although I've driven it about 200 miles since the laydown and 100 since the oil change) and when parked I had quite an oil leak. 

It looks like it's mostly coming from the right side of the engine case, the same side the bike went down on.  Is this an involved fix?  Also, the cam chain tensioner has leaked a little ever since I bought it.  How hard of a fix is that?  Do I need to drain the oil, etc?

Any info would be great.

Thanks

3imo

mostly coming from WHERE on the right side engine case?  a hole?  or the gasket?

replaceing the gasket is a sinch  just be sure not to scratch the mating surfaces and make sure to clean them very well.

you don't have to drain the oil to remove the cam chain tensioner.  I suggest removing it , cleanning it and see if that will remedy the leak.
Not the brightest crayon in the box, but I can still be seen from a distance.  ;P
QuoteOpinions abound. Where opinions abound, mouths, like tachometers, often hit redline. - STARWALT

Jarrett you ignorant my mama...

BaoQingTian

Errrr, the entire underside of my engine, as well as the casing is covered in oil from the ride.  Hard to narrow it down at this point I'm afraid.

One search result suggested cleaning the engine, then using talcom powder to coat it to narrow down where the leak is coming from..

I'm honestly just nervous about cracking open the engine.  I've rebuilt my carbs, done my fork seals and oil, but never played with the engine.  What's the difficulty level and expected time for gasket changes for a first timer.

3imo

Quote from: BaoQingTian on September 08, 2006, 02:00:37 PM
One search result suggested cleaning the engine, then using talcom powder to coat it to narrow down where the leak is coming from..

Hey that was me. :cheers:

If you've rebuilt your carbs, changing the gaskets is a no brainer.  especially the crank cases.  clean the bike and use the powder to find the leaks.

if it is just the crank case covers, try tightening them to spec first. that might work. of not the case gaskets are like 7$ from bike bandit.

I can walk you through it, if necessary.

Good luck :thumb:
Not the brightest crayon in the box, but I can still be seen from a distance.  ;P
QuoteOpinions abound. Where opinions abound, mouths, like tachometers, often hit redline. - STARWALT

Jarrett you ignorant my mama...

SMF spam blocked by CleanTalk