Light drop, pinched wires now no signals (* NEED RELAY *)

Started by scottpA_GS, June 04, 2007, 10:51:40 AM

Previous topic - Next topic

scottpA_GS

Hey..

I droped my GS in the grass.. No damage except...

A few wires had gotten pinched behind the headlight ( I have the dual buells) at first I had right signals, no left, and no high beam..

Now I got the high working, fixed the wires I could see that had been damaged.

NOW.. THe signals light, but VERY dim and no blink. If I pull the front signals the rear still do the same...

IDEAS?


~ 1990 GS500E Project bike ~ Frame up restoration ~ Yosh exhaust, 89 clipons, ...more to come...

~ 98 Shadow ACE 750 ~ Black Straight Pipes ~ UNI Filter ~ Dyno Jet Stage 1 ~ Sissy Bar ~


scottpA_GS



~ 1990 GS500E Project bike ~ Frame up restoration ~ Yosh exhaust, 89 clipons, ...more to come...

~ 98 Shadow ACE 750 ~ Black Straight Pipes ~ UNI Filter ~ Dyno Jet Stage 1 ~ Sissy Bar ~


makenzie71

weak light sounds odd.  I'd start looking at grounds and pull the headlights off so you can see the wiring harness clearly.  Make sure all the connections are snug.  No blinking usually means there's a bulb out or there's not enough resistance...might be a damaged relay but I don't know where the relay is or how it oculd be effected by a light drop.

scottpA_GS

Thanks MAK

It was the relay. We had one in the shop for an 01 and it worked but they blink to fast... I am hoping that someone on here has a spare for 99 and older.

THANK AGAIN MAK !


~ 1990 GS500E Project bike ~ Frame up restoration ~ Yosh exhaust, 89 clipons, ...more to come...

~ 98 Shadow ACE 750 ~ Black Straight Pipes ~ UNI Filter ~ Dyno Jet Stage 1 ~ Sissy Bar ~


SMF spam blocked by CleanTalk