ok guys, i need some small stuff soon

guage cluster black plastic backing peice.
the metal mounting bracket with atleast the highbeam light lense... just needs to be straight please, no matter of the paint or lettering...

these things i will take if is cheaper then new on bikebandit, especially if im already buying somthing above from you...
both grips and bar ends,
tach and speedo rubber surround (will buy new if needbe)
the headlight adjustment setup, screw, spring, and clip...(will buy new if needbe)
clutch saftey switch, lever, mount, the whole shebang, prefer silver finished in good cond or (will buy new if needbe)
the gas tank and seat rubbers, im missing most all of them so anything you have lemme know...(will buy new if needbe)

now, i will also need a good front wheel, no bends, 3swirl style. wheel only
but may have to wait a lil bit for $$ reasons

and i may need a good stock seat, or seat cover... but i may cut mine down to snub off the bad spot at the top/front,,,
mine has been torn up at the nose...

i also will be wanting to look into two small mufflers, to possibly put duals on it.

and last, i will eventually want a nicer left and rear plastic peice, i got a right one but now the patched left one looks bad,

ill post more things im sure,

post prices here or email/PM me with what you have,,,  i am in orlando fl 32804
thanks


now the forsale

old turn signals and brake lense, one front housing and lense is bad/gone, brake lense is dirty.scratched

the stock carbs which for some reason are missing some parts and the left carb butterfyl sticks,,,

the old, really screwed up right side plastic...

front brake master cylinder, complete with broken off lever, but working cyl and brake light switch... includes the bolt for line and bracket but the mirror ear on the bracket is broke off.

will have the airbox forsale soon as ill be ordering a k&n slip on soon...

Use a RV over flow catch can (available at auto parts store) and get carbs and manifolds and get it running before you plonk the money for the rest.
Cool.
Srinath.

Figured id say hi..already gave you parts  , good luck with the rest.

- Alan -

hey thanks guys,
still looking for carbs/intakes, would love t knw if the engine is good before spending too much... will be hitting the local Junk Yards this week

ok well i can get the carbs figured out i think, just need to get the intakes, bidding on some now but may not win, still really needing a complete front brake lever assemblie  intake boots. and then a front wheel, and tail plastics,,,

dude, get your chain on ebay. I got a stock o-ring for like.. $53, shipped.

edited, bought a set of intakes on ebay, arrived fine...

I have a few parts you may want, depending on the level you want to restore.

brake light lens
turn signals
seat cover (I think it has a small tear in the back)
right side plastic (I think it is the right side but needs repainting and has a piece missing but is covered by the seat)
non-stock mirrors
stock fuel lines (from a running crashed biked)

I will let this stuff go cheap. I can get pics. Let me know if there is anything else you need.

I may I have a front wheel that I can sell.

yea, pm or email me the prices on this stuff, my first goal is to get it running and verify its good first, but that should be in a bout a week, then i will need most of what you listed,,,
matt

ok worked out a deal for the turn sigs, front wheel, right plastic, and mirrors

and working on a deal for the carbs/parts, tail light, and front brake lever assembly

thanks

still need front wheel, brake lever, and now need complet carb set, found that my carbs are missing some internales and doubt that it was even running,,, 100 cash or shipped avail now for a GOOD, RUNNING set of carbs,

Quote from: amcline on May 29, 2007, 06:33:08 PM
ok worked out a deal for the turn sigs, front wheel, right plastic, and mirrors

and working on a deal for the carbs/parts, tail light, and front brake lever assembly

thanks

i have a front wheel with rotor and tire,  tail light, brand new front brake assembly pm me if you are interested

ok i got in a set of mirrors, right side plastic, turn signals, brake lense, and intakes.
i also have a set of carbs coming soon now.

still need a front brake lever and the clip the mirror screws into on the right..

and will need in future a good front wheel. possibly brake pads, guages and seat or cover.

ok i should have carbs and front brake lever assembly coming in the mail now,

i thought of a couple other things i need

rear brake lever, just the metal arm and maybe the rubber boot for it, (somone bent mine up like for a shorter person but im tall)

gast tank rubbers, all of them,,, my tank is missing the rubber trim around bottom edge, the front rubber for the mount, and the 2 rubber washe type things that hold the tank to the bracket.

i also will need the speedo/tach plastic casing, and actual mount plate, and the rubber ring for them(i dont need the actual speedo or tach)

and i also will need the headlight mounting hardware and any grommets,

oh yea, and a seat still. but after seeing the prices maybe ill just recover mine...

hey matt,
i should be hopefully receiving new rims/tires soon. I have a front rim/tire ..tire is a 120 not 110 if you want for i donno 30-40 maybe. you saw it on my red gs when you picked up topper. lemme know else im selling rims on ebay. 

-Alan-

cool, yea i may definatly take that front wheel, lemme know when you are ready to get rid of it and ill find out when ill be in the area again.

oh, do you know what sizes will fit on the rear? i was hoping to get a new rear tire but with a bit more "crown" or height as some would say, the stock 140-70-17 i think it is, is pretty flat and low profile...

1 have a 150/70 on mine and its tall , stock is 130 i think. Im gonna get rid of the rear also im going for a lower profile. Soon as my new ones arrive ill email you
-alan-

yea lemme know bro..

i got the carbs in today ,,, might try to fire it up tonight, well see.

well i just finished getting it ready to fire, but had one last problem
flushed the tank
new fuel lines
cleaned the petcock screen
mounted carbs
routed everything
mounted and routed air box and fuel lines,(what a pain!!!) anyone got some pod filters? please!!!
got the tank on
fixed fuel leak (der- yea the one old line i used was bad!)
checked plugs
lubed cyls
primed carbs
conect batt and hit the switch,,,,,,,, nothing
check starter wire, good
switch, good
drilled out rusted bolt in headlight
checked clutch saftey switch, bad, well somtimes, lol so after 3-4 tries i just bypassed it
hit the switch and........

f-in battery is dead!!!!!!
er, guess i can wait one more day, ill have to go buy a batt charger now i guess.

so.anyone have air filters and a clutch assemblie with cable i guess as mine is rubbed in a few places

matt

Yeah I gave up on my clutch switch and just bypassed it in the headlight. Would take three or four goes to start it holding the switch and pumping the clutch.

James