brake lever w/ remote master cyl.?...

RobTheTyrant · July 27, 2007, 07:01:53 AM

How tough would it be to swap my big fat ugly master cylinder for a nice small remote one? I've got an issue with the banjo bolt hitting the tree with my new bars and the remote looks like it would work perfectly if it's not a huge ordeal to go through.

werase643 · July 27, 2007, 07:22:10 AM

remove yours
install new one
bleed brakes

pretty simple
just get same diameter bore or the lever feel will be different

solosociety · July 27, 2007, 07:49:51 AM

where can you pick up a remote master cylinder? ok i should say for fairly cheap

werase643 · July 27, 2007, 08:07:19 AM

flea bay.....

RobTheTyrant · July 27, 2007, 09:01:57 AM

^ YEP...

DaxFX · July 27, 2007, 09:08:33 AM

someone can tell me how can I enter to flea bay

??

spc · July 27, 2007, 09:10:59 AM

Flea Bay is a common nickname for Ebay.
Go to Ebay.com and it should redirect to your countries site.

DaxFX · July 27, 2007, 09:28:08 AM

fleaBay = eBay ?? i dont understand lots of people talk obout FleaBay ..

werase643 · July 27, 2007, 09:45:39 AM

if you ever get screwed on e-bay....you will think hard about using it.
I sent an item back due to important parts missing....and have never heard from the seller again......I don't like e-bay but i will still buy as long as it is freakin cheep

RobTheTyrant · September 07, 2007, 12:17:05 PM

Anybody happen to know what diameter piston these things have got? 5/8" or 14mm?

WREX · September 07, 2007, 12:30:47 PM

i don't have a remote one, but i am using a older gixer MC. it's mounted on an angle (used with clipons), smaller and the banjo bolt mounts on the front side instead of towards the gauges. uses stock lever from GS. was cheap on ebay.

dgyver · September 07, 2007, 08:53:52 PM

Quote from: RobTheTyrant on September 07, 2007, 12:17:05 PM
Anybody happen to know what diameter piston these things have got? 5/8" or 14mm?

The size is normally imbossed on the m/c.

News:

brake lever w/ remote master cyl.?...