OK anyone have any idea ... 40 mm intake, 34 exhaust. Can get 40's from Kibblewhite, need the 34. The exhaust valves are different (tulip angle and other sheite) and its also smaller in dia if only by a sliver. 8mm valve stems and I can machine out of a blank. The only 34 mm from kibblewhite is a titanium which is 99 bucks a pop.
So ... need 34mm valves for a GS preferably a blank cos GS valves are longer face to groove.
So anyone has any idea Dgyver ... JamesG, BobB, Werase ... bueller ...
Anyway werase what is going on, you doing good
Cool.
Srinath.

Sorry I cannot be any help with valve options. There was a GR head on ebay the other day. I got some of the other motor parts. Ken has a GR head that he owes me, not that I am going to use it....got other plans. Find it and you can have it.

I missed a call from Ken last month. Slacker me never called him back.

OK let me see, I'll check with him.
BTW I may have a solution (if my valve seats and guides are fine ...) I located some other 36 and 40 head valve blanks, so I can do it if the head isn't totally f@#ked.
I'll know in 2 days.
We been trying to catch The Ken too ... I dunno, he out of town maybe
Cool.
Srinath.

I know, right? I called him a few days ago and still no answer.  Still down by the river 

I would need a good pair of cam shafts ... or cam shaft sprokets. Mine has teeth marks on it.
Cool.
Srinath.

  Guess what I got coming from the GR motor that was parted on ebay? 

Actually Ken should have the other set of cams that go with that other head.... if they can be found.... and Ken