I'll try and find it first chance I get.

I need this..........when u can please.


Or does anyone in LA/OC has done this before?? or think they are capable of doing this?? i need these installed soon.


thank, thanks yall...

Click on 3D Fitting Guide
http://www.rg-racing.com/browseBike/Suzuki/GS500_FullyFaired/All_Years.aspx

JoNathan

Quote from: GI_JO_NATHAN on October 16, 2007, 07:42:45 PM
Click on 3D Fitting Guide
http://www.rg-racing.com/browseBike/Suzuki/GS500_FullyFaired/All_Years.aspx

JoNathan

thanks..

the dealer also was saying something about some brackets...such as they bracket inside the engine mount bolt and wrap around so then the slider gets attached to the bracket. As good as the engine mount, but more cost involved with the bracket?

anyone?/

From everything I've read, the ones that atach with a bracket, like the "No Cut Sliders," will never be as strong as ones that use one long bolt through the engine mount.

Not sure if that answers your question, but thats my $.02

JoNathan

Quote from: mike07gs500f on October 09, 2007, 11:26:33 PM

Quote from: sanjay on October 09, 2007, 01:47:17 PM
Well £46.   The exchange rate and airmail is what makes it so expensive over here.  There are others (at the bottom of the wiki page) that may be cheaper or more easily available, like from Lockhart Phillips.  Anybody used those before?

the WIKI page link doesnt work...

anybody have any decent places in the states???for engine mounted sliders?? i guess some modification of the fairing is necessary...

/

or anything in the states for that matter....I NEED sliders, and dont want to buy from oversea's and wait 3 weeks for em...

:/




what to do?? what to do??

Quote from: sanjay on October 11, 2007, 03:30:26 PM
http://www.newportcycleparts.com/categories/body_fairings_etc/LP_frame_sliders.htm

It says to call for a price.

calling em up tommrrow fo sho.

Quote from: mike07gs500f on October 17, 2007, 11:31:36 PM

Quote from: GI_JO_NATHAN on October 16, 2007, 07:42:45 PM
Click on 3D Fitting Guide
http://www.rg-racing.com/browseBike/Suzuki/GS500_FullyFaired/All_Years.aspx

JoNathan

thanks..

It isn't that hard to do- I 'm not the most mechanically inclined and I installed the R&Gs on my bike with little difficulty. You just have to take your time. measure twice - cut once  I followed the steps provided and the install was a breeze.

Quote from: bigbutt on October 19, 2007, 03:15:59 PM

Quote from: mike07gs500f on October 17, 2007, 11:31:36 PM

Quote from: GI_JO_NATHAN on October 16, 2007, 07:42:45 PM
Click on 3D Fitting Guide
http://www.rg-racing.com/browseBike/Suzuki/GS500_FullyFaired/All_Years.aspx

JoNathan

thanks..

It isn't that hard to do- I 'm not the most mechanically inclined and I installed the R&Gs on my bike with little difficulty. You just have to take your time. measure twice - cut once  I followed the steps provided and the install was a breeze.

Gotcha...Okay.i hear ya loud an clear.

how were the sliders from R&G's?? and how long did they take them to ship to you??

:wondering:

I went to a local shop today, and they said i have to get sliders specifi to the bike. I guess other sliders arent interchangeble with these gs500's.

edit* what did u end up paying for the sliders in total??

 

Quote from: mike07gs500f on October 18, 2007, 11:46:33 PM

Quote from: sanjay on October 11, 2007, 03:30:26 PM
http://www.newportcycleparts.com/categories/body_fairings_etc/LP_frame_sliders.htm

It says to call for a price.

calling em up tommrrow fo sho.

Did you get a quote from them? 

Also, the R&G's cost Wrecent $113 including shipping, as of currency rates in August 06.  So they'll be slightly more now.

Quote from: sanjay on October 22, 2007, 02:18:24 PM

Quote from: mike07gs500f on October 18, 2007, 11:46:33 PM

Quote from: sanjay on October 11, 2007, 03:30:26 PM
http://www.newportcycleparts.com/categories/body_fairings_etc/LP_frame_sliders.htm

It says to call for a price.

calling em up tommrrow fo sho.

Did you get a quote from them? 

Also, the R&G's cost Wrecent $113 including shipping, as of currency rates in August 06.  So they'll be slightly more now.

Yeah, freakin number is noooooo gooood.

:/

Quote from: mike07gs500f on October 20, 2007, 09:21:45 PM

Quote from: bigbutt on October 19, 2007, 03:15:59 PM

Quote from: mike07gs500f on October 17, 2007, 11:31:36 PM

Quote from: GI_JO_NATHAN on October 16, 2007, 07:42:45 PM
Click on 3D Fitting Guide
http://www.rg-racing.com/browseBike/Suzuki/GS500_FullyFaired/All_Years.aspx

JoNathan

thanks..

It isn't that hard to do- I 'm not the most mechanically inclined and I installed the R&Gs on my bike with little difficulty. You just have to take your time. measure twice - cut once  I followed the steps provided and the install was a breeze.

Gotcha...Okay.i hear ya loud an clear.

how were the sliders from R&G's?? and how long did they take them to ship to you??

:wondering:

I went to a local shop today, and they said i have to get sliders specifi to the bike. I guess other sliders arent interchangeble with these gs500's.

edit* what did u end up paying for the sliders in total??

It took a couple of weeks- they shipped them Fedex- they have to clear customs so there goes some time.
I paid around $130- from what I remember
Here's a couple of pics with the sliders- One thing I forgot to mention is I used some nylon washers as spacers so the sliders sit away from the fairing.

damm couple of weeks?

sheessh.



thanks soo much for the pics, can you put of more of them?? that would be great. Like how far it sticks out looking downward. and that side angle more
closer the bike.


thanks again so much for the response and INFOOO!!

sheeesh after looking at those pictures some more, it doesnt really look like it protect much....if anything...




call me 



BTW. nice looking bike y0.

i've seen a friends gs-f that has been dropped on both sides and the only damage on the engine cover( which is right next to the sliders). they will prevent that damage but they might very well move the damage points to somewhere else. their only main purpose is saving the frame not the plastics.

Quote from: CndnMax on October 22, 2007, 06:06:37 PM
their only main purpose is saving the frame not the plastics.

Don't bother trying to tell them, they aren't listening. 

Quote from: GSRider on October 23, 2007, 03:32:13 AM

Quote from: CndnMax on October 22, 2007, 06:06:37 PM
their only main purpose is saving the frame not the plastics.

Don't bother trying to tell them, they aren't listening. 

i listen, despite what you just stated.

Quote from: mike07gs500f on October 22, 2007, 05:53:23 PM
damm couple of weeks?

sheessh.



thanks soo much for the pics, can you put of more of them?? that would be great. Like how far it sticks out looking downward. and that side angle more
closer the bike.


thanks again so much for the response and INFOOO!!

Here you go.