will these barends fit clubman bars

mach1 · April 27, 2008, 06:29:55 PM

http://cgi.ebay.com/ebaymotors/SUZUKI-2000-08-GSXR-600-750-1000-CHROME-SPIKE-BAR-ENDS_W0QQcmdZViewItemQQ_trksidZp1638Q2em123QQcategoryZ35587QQihZ003QQitemZ130217186674QQrdZ1QQsspagenameZWD7V

guitarking135 · April 27, 2008, 08:19:02 PM

I don't think so they dont expand enough. but you could get them and use the bushings off your stock bar weights and do it that way.

bucks1605 · April 27, 2008, 08:42:17 PM

Quote from: guitarking135 on April 27, 2008, 08:19:02 PM
I don't think so they dont expand enough. but you could get them and use the bushings off your stock bar weights and do it that way.

I agree 3/4" or 0.75 in. and clupman bars are 7/8" or 0.875 in.

But just to be sure I'd ask the seller if they would fit a 7/8" bar.

Or you could do like guitarking said and use your stock plug.

ben2go · April 27, 2008, 10:05:42 PM

The club mans are 7/8 outside diameter.The bar ends go by the bars inside diameter which should be close to 3/4.So yea they should fit if they expand to 3/4.

mach1 · April 28, 2008, 06:08:12 AM

yeah ben2g0 is correct Ihad a look see and my stocker and the sm2s and the thickness was a 1/16 so 7/8 - an 1/8 is 3/4

frankieG · April 28, 2008, 04:39:23 PM

i bought their carbon look bar ends and they fit...but do stick out a little bit more because of the metal threading on my 89 clip on bars

News:

will these barends fit clubman bars

mach1

guitarking135

bucks1605

ben2go

mach1

frankieG