News:

Protect your dainty digits. Get a good pair of riding gloves cheap Right Here

Main Menu

Carb problem?

Started by whitewolf, June 23, 2008, 07:36:34 AM

Previous topic - Next topic

whitewolf

Ok, here is the problem. I am not sure where to go from here.
The bike will not hold it's idle. ( I can adjusted the idle knob, but it seems to be off the next day.)
The second thing I have noticed, it will die for no reason. I could come to a intersection and it would die or down an off ramp.
I have checked the basics:
air filter and gas filter

I have a lot on my plate at home and work, so I did not search this forum real well for any thing like this problem.

I would be thankful of any help ideas.

The Buddha

Idle not holding cos idle knob wont stay in place ... like it unscrews itself ?? does it have the spring and washer on it ??
Else you may need a clan of carbs, check for vacuum leaks, and possibly a rejet. Valves, filter ??? are those good.
Cool.
Buddha.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

birdman

Flaky vacuum operated petcock??
Try turning the petcock to the PRIME (PRI) position.

SMF spam blocked by CleanTalk