News:

Protect your dainty digits. Get a good pair of riding gloves cheap Right Here

Main Menu

FS: (SoCal) JamesG CF solo seat, gas tank + more

Started by franke3c, June 17, 2008, 04:47:30 PM

Previous topic - Next topic

Kurlon

On the solo seat, does it have a cutout for the tail light, and how does it attach to the bike?  I see two bolt holes spots up front, are those 'it'?
1991 GS500E - LRRS/CCS Novice #771

banner

how much for the stock seat shipped to san diego? I might be down to come pick it up.
Peace

dgyver

Quote from: Kurlon on June 29, 2008, 08:55:58 AM
On the solo seat, does it have a cutout for the tail light, and how does it attach to the bike?  I see two bolt holes spots up front, are those 'it'?

The back is cut out with room for a tail light.

The seat mounts with 2 bolts up front that replace the tank bracket bolts. The rear uses an aluminum bracket that mounts to the rail where the seat latch is located. 2 screws attach the seat to the aluminum bracket. The seat sits on 2 foam blocks attached to the subframe rails. You can get creative on mounting for your own application. These were originally designed for track use, minimalistic and light weight.

That looks like one of the last tails I made.
Common sense in not very common.

Kurlon

Quote from: dgyver on June 30, 2008, 07:43:45 AM
Quote from: Kurlon on June 29, 2008, 08:55:58 AM
On the solo seat, does it have a cutout for the tail light, and how does it attach to the bike?  I see two bolt holes spots up front, are those 'it'?

The back is cut out with room for a tail light.

The seat mounts with 2 bolts up front that replace the tank bracket bolts. The rear uses an aluminum bracket that mounts to the rail where the seat latch is located. 2 screws attach the seat to the aluminum bracket. The seat sits on 2 foam blocks attached to the subframe rails. You can get creative on mounting for your own application. These were originally designed for track use, minimalistic and light weight.

That looks like one of the last tails I made.

Drat, I was hoping there was no taillight cutout, not that it's that big a deal.  : )  If all the hardware is there, I'll start verifying finances.  That tail with a Titan fairing kit should dress up my race bike quite nicely I think, assuming I can swing it all.
1991 GS500E - LRRS/CCS Novice #771

Kurlon

Just reviving this thread, is the solo seat still available?
1991 GS500E - LRRS/CCS Novice #771

franke3c

Haven't been watching this thread..

I 've sold the solo seat already sorry!

Kurlon

D-oh!  Oh well, if one turns up... I still have a chance another will. : )
1991 GS500E - LRRS/CCS Novice #771

SMF spam blocked by CleanTalk