News:

New Wiki available at http://wiki.gstwins.com -Check it out or contribute today!

Main Menu

wileyco exaust need jetting help

Started by natewesselink, July 21, 2008, 07:24:41 PM

Previous topic - Next topic

natewesselink

i have a wileyco exaust system and my bike is runnin way too rich
my question is this
does anyone ellse have a wileyco exaust and what jet sizes are needed for this exaust
fyi  i have searched the manufacturers web site and it doesnt say anything about what jets are needed
2000 suzuki gs500e
wilyco exaust and k&n lunchbox
p.s. ride naked

lowcountrygs

I have a wileyco and lunch box. Jetted with 40 pilots 150 mains one washer under each needle and 2.5 turns. Runs great!
1996 GS500, Wileyco muffler, K&N Lunchbox, 40 pilots + 150 mains, 15t sprocket, R1 tail light, progressive fork springs

natewesselink

2000 suzuki gs500e
wilyco exaust and k&n lunchbox
p.s. ride naked

The Buddha

150 mains is only if you have a K&N lunchbox. Your wileyco flows just about the same as any other muffler.
Stock airbox = 125, K&N in the airbox = 127.5. Make sure you have stock needles in it, or these numbers wont work.
Cool.
Buddha.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

SMF spam blocked by CleanTalk