News:

Need a manual?  Buy a Clymer manual Here

Main Menu

WEST coast-kerry's valve adjusting kit?

Started by My Name Is Dave, April 18, 2006, 10:10:24 AM

Previous topic - Next topic
Print
Go Down Pages 1 ... 16 17 18 19 20 ... 22
User actions

pandy

#340
July 01, 2010, 06:08:38 PM
E-mail sent to get status of kit.....again.... not too cool to throttle (so to speak) the forward progress of the kit!  :icon_neutral:

If someone can't use the kit when they're next in line, there's no harm or shame in bumping yourself down a notch on the list! I'll post up when I get an update.
'06 SV650s (1 past Gixxer; 3 past GS500s)
I get blamed for EVERYTHING around here!
:woohoo:

dannyboy6811

#341
July 08, 2010, 10:13:28 AM
Could I add my name to the list? I'm close to the guy in Toronto, Canada (about an hour) so I could pick it up and do my shims in the same day then send it on its way.

pandy

#342
July 26, 2010, 07:52:25 PM
I never got a reply...will try again.  :cry:
'06 SV650s (1 past Gixxer; 3 past GS500s)
I get blamed for EVERYTHING around here!
:woohoo:

pandy

#343
August 07, 2010, 10:22:50 PM
Next in line (ilya, Los Angeles?), please PM me your mailing address; the member who has the kit will pass it along and then get back in line.  :cheers:
'06 SV650s (1 past Gixxer; 3 past GS500s)
I get blamed for EVERYTHING around here!
:woohoo:

DLW

#344
August 12, 2010, 07:13:41 AM
Sorry Guys and Gals.  I'm the stooge who has been "throttling" the forward progress of the kit.  As I told pandy in an email, I haven't been onoline nor working on my bike because I have been going through an unexpected divorce.

Currently my bike isn't even running so I haven't used the kit.  However, I have opened it to verify its contents.

Whomever is next in line please PM me your address and I will get it out to you next day.

Hopefully if I'm given the chance, I can get back in line for the kit again once everything settles down for me and I get my bike running again.

Again, I am so sorry for the delay but I hope you all understand my situation.

Cheers from Northwest Arkansas,

DLW

92 GS500E - '89 clip-ons, '04 signals and rear fender(pending 'ectomy), new dash and gauge buckets.

Firewalker

#345
August 19, 2010, 01:36:54 PM
Have I been around long enough to get on the list?  If a deposit or contribution is needed let me know.  Wondering about my exhaust valves as RPM drops to around 800 when stopping at lights.  Thanks

Scott
Quote from: ohgood on August 30, 2010, 06:00:53 PM
... now we have all this geewiz crap with syntho-titty-farkle to eat your money. money is for gas. gas = fun. doit.

:)

007brendan

#346
August 20, 2010, 03:01:30 PM
So here's the list as I see it (feel free to correct, remove your name, etc)):

ilya (Los Angeles, CA)
vorBH (Canada)
007brendan (SF Bay Area, CA)
Firewalker (?)
"Good judgement comes from experience. Experience comes from bad judgement."

DLW

#347
August 20, 2010, 03:09:50 PM
I have still not heard from the next in line with an address so I still have the kit.

DLW

92 GS500E - '89 clip-ons, '04 signals and rear fender(pending 'ectomy), new dash and gauge buckets.

007brendan

#348
August 20, 2010, 04:18:18 PM
Try to contact the next in line -- vorBH -- though it says he hasn't logged in in over 2 months.
"Good judgement comes from experience. Experience comes from bad judgement."

Firewalker

#349
August 20, 2010, 10:40:36 PM
I am in New Mexico BTW.......are there shims in there now to swap out if one fits?  I figured I would buy a couple of the thinner ones to toss in the bag.  Seems to be a hot item.
Quote from: ohgood on August 30, 2010, 06:00:53 PM
... now we have all this geewiz crap with syntho-titty-farkle to eat your money. money is for gas. gas = fun. doit.

:)

Firewalker

#350
August 24, 2010, 05:21:49 AM
DLW:  How many of the thin shims are in there?  I will be working on my bike and I may run a feeler to check clearances before hand and order what shims I need while waiting on the kit.  Any word on the next guy in line?  Have a good day.
Quote from: ohgood on August 30, 2010, 06:00:53 PM
... now we have all this geewiz crap with syntho-titty-farkle to eat your money. money is for gas. gas = fun. doit.

:)

DLW

#351
August 24, 2010, 06:13:10 AM
Nope still no reply.   Guess it depends on what you mean by "thin".  I haven't measured any since I really haven't used the kit but I can do that for you tonight.

DLW

92 GS500E - '89 clip-ons, '04 signals and rear fender(pending 'ectomy), new dash and gauge buckets.

Firewalker

#352
August 24, 2010, 07:14:08 AM
They should be stamped on the shims.  Just curious what the inventory is.....If there are 8 of the 290 shims it may not work if I am needing 265s....  Know what I mean?
Quote from: ohgood on August 30, 2010, 06:00:53 PM
... now we have all this geewiz crap with syntho-titty-farkle to eat your money. money is for gas. gas = fun. doit.

:)

DLW

#353
August 24, 2010, 07:24:34 AM
Yes but you can't count on what they are stamped due to wear.  So they should be measured.  Know what I mean?  ;~)

I will measure them tonight and post my findings.

DLW

92 GS500E - '89 clip-ons, '04 signals and rear fender(pending 'ectomy), new dash and gauge buckets.

Firewalker

#354
August 24, 2010, 07:43:08 AM
That's true.....yeah cool...lemme know.  Have a good one!
Quote from: ohgood on August 30, 2010, 06:00:53 PM
... now we have all this geewiz crap with syntho-titty-farkle to eat your money. money is for gas. gas = fun. doit.

:)

pandy

#355
August 31, 2010, 07:47:32 PM
Quote from: DLW on August 20, 2010, 03:09:50 PM
I have still not heard from the next in line with an address so I still have the kit.
DLW

Hi DLW:

If you haven't heard from anyone, please PM me and I'll let you know where to send the kit.

Thanks!
'06 SV650s (1 past Gixxer; 3 past GS500s)
I get blamed for EVERYTHING around here!
:woohoo:

DLW

#356
August 31, 2010, 09:31:15 PM
Pandy,

PM sent to ya.

DLW

92 GS500E - '89 clip-ons, '04 signals and rear fender(pending 'ectomy), new dash and gauge buckets.

pandy

#357
August 31, 2010, 09:52:22 PM
Quote from: DLW on August 31, 2010, 09:31:15 PM
Pandy, PM sent to ya.
DLW

Msg received and replied! Thanks!
'06 SV650s (1 past Gixxer; 3 past GS500s)
I get blamed for EVERYTHING around here!
:woohoo:

Firewalker

#358
September 01, 2010, 07:42:55 AM
any news on the kit progress?  Which way did it go???   O0
Quote from: ohgood on August 30, 2010, 06:00:53 PM
... now we have all this geewiz crap with syntho-titty-farkle to eat your money. money is for gas. gas = fun. doit.

:)

Firewalker

#359
September 12, 2010, 10:01:30 PM
Seriously, who has it? 
Quote from: ohgood on August 30, 2010, 06:00:53 PM
... now we have all this geewiz crap with syntho-titty-farkle to eat your money. money is for gas. gas = fun. doit.

:)
Print
Go Up Pages 1 ... 16 17 18 19 20 ... 22
User actions
SMF spam blocked by CleanTalk