Handlebar pics... while making them... and breaking them. Sorry ... no one told me better when I asked for wehre to host them.

http://www.imagestation.com/album/?id=4287360331

Cool.
Srianth.

OK here it is in photobucket.
http://img40.photobucket.com/albums/v122/Seshadri_srinath/?

Cool.
Srinath.

Quote* This album is password protected

Care to share the password?  

Quote from: Kerry

Quote* This album is password protected

Care to share the password?  

ya ..

by the way try out www.fox302.com

OOps...sorry for providing the bum site seshadri...

http://fox302.com/index.pl?s=vg&user=srinath
Cool.
Srinath.

OK i have 7 more pics I need to show ... that offtopic site isn't working. My account has not been activated in 4 hours.
Cool.
Srinath.

http://img40.photobucket.com/albums/v122/Seshadri_srinath/?
The album has been made public... Hopefully that has solved the problem... if not the password is GS500E  -  Case sensitive.
Cool.
Srinath.

Please check the pics out... the bar end pics especially... I had to sand off the powder coating on the bar end to fit it... The powder is varying thicknesses in different ones... and from make to make. So a little rough sanding will get it to fit inside the bar... didn't want to take out another 16th of the bar for that. The rubber portion of the bar end needs to be shaved as well... and I didn't show that... cos well shaving rubber is easier than anything.. or use some radiator hose in place of that rubber piece. I drilled the bars to 1/2 inch depth to a 11/16th diameter. a 3/4th would be the next size up and would have been too thin.
Cool.
Srinath.

UPS says everyone I send it to has got it... Please confirm... Thanks.
Cool.
Srinath.

OK Guys pictures of bars are here.
Cool.
Srinath.