News:

Protect your dainty digits. Get a good pair of riding gloves cheap Right Here

Main Menu

slight problem..

Started by drowningbird808, October 13, 2011, 11:20:33 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

drowningbird808

October 13, 2011, 11:20:33 AM
i just got a new chain and sprocket, i got everything on there but now theres now tension on the clutch lever. i cant figure out why, i looked at the oem part picture and everything looks right? any ideas?
06 blue gs500f, katana rear shock, sonic 0.85 front springs, LED gauge lights, inagrated tail light, luchbox 22.5,65,142.5 cut down yoshi

JAY W

#1
October 13, 2011, 01:00:16 PM
Sprocket cover not aligned correctly,clutch pushrod not connecting with the worm drive.
89 GS5,Squire sidecar,risers,Skidmarx bellypan,R1 oval can race can baffled,96 forks,beefy kwak shock,heated grips,scotoiler.LED Clocks.

the mole

#2
October 13, 2011, 01:05:22 PM
Check both ends of the clutch cable are where they should be, (inner and outer of the cable) and make sure the cover over the sprocket is seated properly, if it is not flush with the engine case it will upset the clutch adjustment. At this stage I would not adjust the clutch as its obviously something wrong with the way it went back together and adjusting it will mask the real problem.

drowningbird808

#3
October 15, 2011, 09:13:55 AM
thank guy i figured it out
06 blue gs500f, katana rear shock, sonic 0.85 front springs, LED gauge lights, inagrated tail light, luchbox 22.5,65,142.5 cut down yoshi

mister

#4
October 15, 2011, 01:14:03 PM
Quote from: drowningbird808 on October 15, 2011, 09:13:55 AM
thank guy i figured it out

And what did it turn out to be?

Michael
GS Picture Game - Lists of Completed Challenges & Current Challenge http://tinyurl.com/GS500PictureGame and http://tinyurl.com/GS500PictureGameList2

GS500 Round Aust Relay http://tinyurl.com/GS500RoundAustRelay
Print
Go Up Pages1
User actions
SMF spam blocked by CleanTalk