I'm dead set on finally converting my F to an E and I need to track down a headlight.  After losing out on a few ebay auctions (and watching those prices skyrocket in the last few hours), and found a link to this headlight somewhere on this board:

http://www.ebay.com/itm/300597070072?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1864wt_1002


My question is two part. 

1) Does anyone know if this will work with the US wiring and just plug right in?  I don't really care if the parking light works or not, though I guess I would prefer if it did since it's there.

2) Can I use this mounting bracket from Dennis Kirk, or do I have to try to track down the stock mounting bracket?  Those things are almost as hard to find as headlights.

https://www.denniskirk.com/drag-specialties/side-mount-headlight-brackets.pH27101.prd/H27101.sku

I'm open to other suggestions or ideas on this conversion if you have them 

Thanks in advance.

Should be a YES on everything.
Lights4All is good stuff. I use it on all my bikes: headlamp, smoke turn signals (for the 2001+ turn signals) and smoke tail light.
You can wire up the running light. Your "F" has it, same wires go to the running light in the Lights4All headlamp.
Suggestion: wrap a little thin bit of rubber on the bracket so you don't scratch the forks. It will give a little better grip, too.

You, sir, are the man.  Thanks for the quick reply.  I think I'll put my order in this week.  I was planning on the rubber around the bracket.  Maybe just buy a cheap bicycle inner tube or something and cut it to length.