Yeah Yeah I did it Again!
This time not entirely to blame.

Exhaust was leaking at the headers when I put it back on after having the slip-on welded.
Didnt know it was until it was Far too late.
Things been poppin so much lately that I thought nothing of it.....

Cracked the bottom of the exhaust valve guide.
When trying to remove it, slipped, cut my finger open pretty good and took a chunk of metal out of the cylinder head around the valve guide ><
(it never ends)


So now I need another!
Prefer a matching silver head First, but a black one for the right price or if I cant find a silver one will be considered.

Need the complete cylinder head.
Valves and Valve Guides Intact!
Matching cam shafts and mounts <<<< a Must!

Prefer it to have the hole in front for the tach cable.
but if its a simple swap then that would be fine.

PM me with wachya got and how much
located at 18651

(edit)
pic of the color of the engine. (not sure if the shade of silver varied in years.)

If you can't find anything, I  have a few black heads (no, not a skin condition). I've removed the shims for my stock pile but could put some back in. Cams and stuff are all there.
I have a 2006 silver engine I haven't started up. It does manually crank OK. Was supposed to be working when pulled from a bike but the oil like supposedly came on after 20 minutes of running. Since I have another fully working 2002 silver engine I got a couple months ago, I might consider parting out the 2006 engine I mentioned. It would need an electronic tach as it is a 2006. I can see if the other good engine is silver. If so, I might swap heads as I will only use 2006+ wiring on my new bike projects.

Get back to me if nothing shows up in a week or so.

cool beans!!

Yeah I would prefer silver first.
and shims are not a problem.

Just let me know when you get sorted through it.

btw, im currently stuck on 2 feet instead of 2 wheels until I replace the head.

and its too nice out to be doing that! hahah

so the quicker someone saves my @$$ the better. 
(that doesnt mean anyone has me over a barrel on price)

If you can't find a silver one, let me know.

well, I've only heard from you so far.

nothin on craigs or ebay.
well, 2 heads on ebay, but not all the parts are there.

and mixing and matching cam shafts and the mounts to a different head is damm near impossible (for me anyways)

if you're 100% certain you have a matching set.
then toss me a price and shipping to 18651
A black one if a silver one is unavailable as you said you have to check it out.

the sooner im back on the road, the sooner I get to smile again! hahahaha

I can always match the paint up and repaint it silver.

speaking of which, will go see if I can find the color code or whatever for it now.

OK - got it covered. Unless someone has a silver one, I'll be sending a black one out on Monday. We just have to agree on price (...cheap - I never charge what parts are really worth) and I have to go into the bike cave and pick one from the assortment of parts.