A lot of this stuff came with my bike, or is leftover from upgrading my bike. Some of it is pretty asinine but it may hold use to some other twinner. Condition is good unless noted. All of the engine components come from an engine that had 13,000 miles on it. 

Head (1 valve in, 3 out. All 4 valves bent)
NOS Igntion Pickup Cover:
2005 (California?) Carbs (TPS needs 1 screw, stock jets, undrilled mixture screw):
Push/Pull Throttle cables


Intake/Exhaust Cams:


Starter Motor:


Starter clutch gear:



Horn:


Tach drive gear (needs gaskets):


Shim buckets and cam journals:


Ignition pickup (dual, no magnets, wires have been cut [not by me]):


Clutch fibers/rings (fibers worn, rings kept in position/orientation for future clutch job):




Head bolts/washers:


Cam chain guides (should be more somewhere, don't have pics):


Starter motor cover:


Battery Box (2005, foam removed, fresh rustoleum paintjob):


Gear change shaft:


Oil filter cover (and the rest of the gear change shaft):


Oil Pan (Not stripped, no washer, plug included):


Engine bolts (case halves, behind clutch cover, oil pan):


Front Caliper (75% left on EBC HH pads):


Stock Springs:


Short Stalk Bikemaster lights (2 have taped on bullet, 2 are just wires):


Stock long stem lights (2 have wires, 1 has been cut at base, need to fish out from lens side):


Oil Dipstick:


Knurled Grips:


10 MM Mirror:



Mirrors (Stock left, shorty right):


Cheap Chinese Mirrors (blueish tint):


Petcock (early E):



(Pickup only) 2 Batteries:


Rear Caliper arm:


Bar ends (1 needs washer):


Oil Pump:



I've subscribed to the thread and will receive emails upon replies/pm.
Expect a few more things to be added as I continue to pull things out.

Bump, added more parts.

damn, you got everything BUT what I need

I'm interested in the carbs, if you're willing to let them go cheap, or swap for some other parts. I'd also need the boots, since my engine is a little older.

Quote from: burning1 on August 06, 2012, 11:18:12 AM
I'm interested in the carbs, if you're willing to let them go cheap, or swap for some other parts. I'd also need the boots, since my engine is a little older.

No boots, the engine got sold separately. Carbs I'd let go for $110.

Quote from: weedahoe on August 06, 2012, 08:51:08 AM
damn, you got everything BUT what I need

What are you looking for?

I'll take the carbs for $110 if they are still available.

Quote from: gaillarry on August 09, 2012, 02:14:06 AM
I'll take the carbs for $110 if they are still available.

Do you have feedback for trades/ebay?

Sure do, on EBay " Doug4918 "

Still got the petcock for sale? If so, how much?

How much for bar ends?   Shipping to 67454?

Quote from: gaillarry on August 09, 2012, 10:17:57 AM
Sure do, on EBay " Doug4918 "

Excellent, thanks for that. Will this be shipped to Canada?

Quote from: msgoodwrench86 on August 09, 2012, 01:32:58 PM
How much for bar ends?   Shipping to 67454?

$15 sound fair?

Quote from: RossLH on August 09, 2012, 12:28:18 PM
Still got the petcock for sale? If so, how much?

Someone else inquired, but it is still available.
$20 sound all right?

  "Excellent, thanks for that. Will this be shipped to Canada?"

Yes it will.

Bump, op updated.