FS: 1995 GS500 Part Out (some aftermarket)

Started by stafebak, September 12, 2012, 02:43:58 PM

Previous topic - Next topic

stafebak

Well, I broke a valve it turns out.  Miraculously, the cylinder walls survived, it just took a chunk out of the piston.  So pretty much everything is available, except one valve, and one piston.  I wouldn't recommend buying the valves though, just because if one broke, I would imagine the others are nearing that as well. 

Here is the album, if you want specific pictures of other things, let me know, I'll get them within a day.  Emailing me at sbakken87@msn.com would be the fastest way to get a hold of me, just because my phone syncs with that email. 

List of aftermarket stuff I can remember:

V&H Full Exhaust - 185 Shipped
K&N Lunchbox
Katana Shock - 30 Shipped
Racetech .85kg springs (I would *greatly* prefer to sell these with the forks...as I don't want to disassemble) so...with forks - 140 shipped, springs have a little less than 500 miles on them
Reloaded's thicker fork brace - 20 shipped
Brake and Clutch levers with perches. They're off a Katana, and they work totally fine.  It's kind of hard to see but they're a graphite color, and adjustable. - 50 shipped
Gas Tank, coated with POR15 on the inside, coating still holding over a year, outside paint is ugly!

The only other thing I want to note is the paint on the gas tank is garbage, as I was planning on repainting it (person before me did that striping, ew).  However, I did POR-15 the inside last year, and it is still holding up, so I can assume I did a good job, I was very thorough in the process.

I think that's everything, if you have any questions, let me know...thanks!

http://imgur.com/a/ZyRSp#0 (Album)
(4 requested high res photos below)
Exhaust Can - http://i.imgur.com/dZvx4.jpg
Timing Thingy Cover - http://i.imgur.com/t4041.jpg
Rear Plastics (I would rate the paint a 7/10 couple small scratches) - http://i.imgur.com/57Dfr.jpg - http://i.imgur.com/zybX7.jpg

Parts Sold:
Carbs, Lunchbox, Breather
Headlight Assy, Gauges, Seat
Katana Shock

mastertec01

If you still have carbs what do you want for them

catch2otwo


stafebak

Nothing is sold yet.  Did you want the lunchbox with the carbs? By the way, I replaced the bowl gasket, float needle, and all the o-rings on the carbs recently. They we're also cleaned recently (though I would still recommend cleaning before install, just because I'm obsessive like that). 125 shipped for carbs without LB, 140 with.

Gas tank, I'll include the key (obviously) and if you want I'll try to snap a picture of the inside for you, so you know it's actually coated.  125 shipped for that?

rpm121370

2006 GS500F


gage5146

im looking for rear shock and front fork upgrades... so whats the price shipped to 04578 for the rear shock and forks?
When in doubt, Tach her out

stafebak

The shock I would do for 50 shipped, forks, I'll have to check in to that...not sure how much shipping would be, I'll let you know tomorrow via PM.  Also, this ENTIRELY slipped my mind. One of the inner fork tubes on my forks is minorly tweaked...However, I do have another fork that isn't, that I would send with it, and you could transplant the spring over if you would like.  Otherwise I'm not recommending it, but I rode on the minor tweaked fork for 500 miles (Yes, I can be an idiot sometimes when I'm in a bind) and it didn't leak, or cause me to crash.  I did also re-do the dust and fork seals on both.  PM me if you're still interested.

Rexsk8er

Hey, How much for the headlight and headlight mounting brackets shipped to 28651--thanks

catch2otwo


Toogoofy317

How much for the exhaust? It looks pretty rough but could be a good project. If for a good price.
Mary
2004 F, Fenderectomy, barends, gsxr-pegs, pro grip gel covers, 15th JT sprocket, stock decals gone,custom chain guard,GSXR integrated mirrors, flush mount signals, 150 rear tire,white rims, rebuilt top end, V&H Exhaust, Custom heel and chain guard (Adidasguy)

stafebak

Updated some prices. Exhaust too.  I'll get closer pics of it for ya tomorrow.

stafebak


stafebak


bigbad1ton

If they all use the same key, how much for the Ignition switch, Gas cap, and seat lock.

modular


stafebak

Quote from: bigbad1ton on September 26, 2012, 09:14:07 PM
If they all use the same key, how much for the Ignition switch, Gas cap, and seat lock.

They do, but sorry, I just sold the tank :(

bigbad1ton

Quote from: stafebak on September 27, 2012, 12:50:00 PM
Quote from: bigbad1ton on September 26, 2012, 09:14:07 PM
If they all use the same key, how much for the Ignition switch, Gas cap, and seat lock.

They do, but sorry, I just sold the tank :(

Ok Thanx

FlyinRyan

<table style="width:auto;"><tr><td><a href="http://picasaweb.google.com/lh/photo/NJIYomnr0IvNO5umrvLFCw?feat=embedwebsite"><img src="http://lh3.ggpht.com/_Uy6y1ALL4R0/SiCGoN5CUgI/AAAAAAAABFk/zAJaA9vYCzI/s144/IMG_1065.JPG" /></a></td></tr><tr><td style="font-family:arial,sans-serif; font-size:11px; t

knowles

I'll do $40 shipped for the levers and pearches.
1989 GS 500EK

SMF spam blocked by CleanTalk