I've been meaning to do this for months but honestly have been dreading it. First, I'm putting an online spreadsheet to track what's been sold. As parts are asked about or sold, I will add it to the spreadsheet. I'm really not sure how shipping is going to work for bigger parts but I guess we'll figure it out as we go along.

IMPORTANT BACKSTORY:
I have a 2004 GS500F and managed to blow the engine (counterbalance bearings). I found a guy on craigslist who was parting out his wrecked 2007 GS500F. I offered to buy the engine and when I went to pick it up I ended up taking home the entire bike. I used the wrecked 2007 to fix up my 2004 and what I'm selling is everything that's left over.

The complete 2004 engine is in image #24. When it was last on the bike last winter it DID start up and run but had a super nasty vibration - read the story here. I do believe it's a candidate to be rebuilt but please don't take my word on it. It's been sitting outside for the last 8 months.

LINKS:
SALES SPREADSHEET
IMAGES

Parts are located in Dallas, TX.

In an attempt to make this as easy as possible, please post here with:
Image Number:
Part Number/Name:
Link to Parts Diagram:
Diagram Ref Number:
Shipping Zip Code:
Best Offer:
Comments:


For example:
Image Number: 21
Part Number/Name: Rear License Plate Bracket
Link to Parts Diagram: http://www.bikebandit.com/2007-suzuki-gs500f/o/m16095#sch649461
Diagram Ref Number: 17
Shipping Zip Code: 75001
Best Offer: $5
Comments:


IS THE ENGINE IN PHOTO ANY GOOD?

Unfortunately, my phone dislikes your links... It just brings me to your engine vibration thread. However, this one is simple. Do you have an extra frame petcock?

EDIT: Just saw everything on my PC... Nix that question lol. Thanks!

Hey, interested in that front fender.  filled out your form thing too.

Image Number: 19
Part Number/Name: Front Fender
Link to Parts Diagram: http://www.bikebandit.com/2000-suzuki-gs500e/o/m22351#sch244252
Diagram Ref Number: 1
Shipping Zip Code: 94122
Best Offer: 30
Comments

Quote from: JAS6377 on August 30, 2013, 06:21:01 PM
Do you have an extra frame petcock?

EDIT: Just saw everything on my PC... Nix that question lol. Thanks!

Does that mean you don't want it? 


I might be interested,... interested enough to fill out this silly form 


Image Number: 25

Part Number/Name: frame mount petcock

Link to Parts Diagram: yeah, right .... I'm on a shitty laptop in the garage

Diagram Ref Number: it mounts to the frame under the left side of the tank, it has a little lever and gas goes through it ..... if you connect all the hoses together and run it to redline a unicorn will appear

Shipping Zip Code: 55437

Best Offer: $25 shipped

Comments: sorry I'm such a smart ass, I'm genuinely interested in the part ...... oh, and your google spreadsheet link requires a sign in 

Aww... I just didn't see is in the pictures... Oh well. You win this time, fleshpiston!

Quote from: JAS6377 on August 31, 2013, 05:23:48 PM
Aww... I just didn't see is in the pictures... Oh well. You win this time, fleshpiston!

Not at all dood, you posted first, you have dibs 

might wanna fill out the form though 

Quote from: fleshpiston on August 31, 2013, 05:38:13 PM

Not at all dood, you posted first, you have dibs 

might wanna fill out the form though 

Good call lol. If you really need it, you can have my dibs. The reserve connector on mine kept popping off. I just wanted an extra one in case my JB Weld doesn't hold.

Edit: Form filled out, just in case.

Image Number: 25
Part Name: Frame Mounted Petcock
Link to Parts Diagram: http://www.bikebandit.com/2004-suzuki-gs500f/o/m6061#sch504186
Diagram Reference Number: 1 (chicken ASSY,FUEL)
Shipping Zip Code: 17050 (Pennsylvania)
Best Offer: $25 Shipped
Comments: Again, I don't want to steal a part from someone who genuinely needs it, as my current petcock will hopefully be fully functional again.

Thanks again, fleshpiston. To reiterate, I'm willing to concede if you need it more than me. 

Edit again: Whoops. I suppose it's a CHICKEN ASSY lol. 

Image Number:N/A
Part Number/Name:1048491/Valve,Piston
Link to Parts Diagram:www.bikebandit.com/2001-suzuki-gs500/o/m6062#sch246380
Diagram Ref Number:11
Shipping Zip Code:77049 Houston, TX
Best Offer:$25 Shipped
Comments:Its the only thing holding me up from riding...Please help

Hey guys,

I am monitoring the thread and will get back to you ASAP. Accidentally bought a boat a few days ago and it's been keeping me tied up...just like my bike did when I first bought it.

Anyway, I may end up just taking the damn thing apart and putting up pictures of each item separate so you guys don't have to deal with finding part numbers and crap. Just trying to avoid confusion.

Regarding the frame mounted petcock - I'm about 90% certain the one pictured has a leak and needs a new gasket or additional unicorn horn dust or something. Either of you still want it?

Quote from: Raydr on September 02, 2013, 12:04:27 PM
Hey guys,

I am monitoring the thread and will get back to you ASAP. Accidentally bought a boat a few days ago and it's been keeping me tied up...just like my bike did when I first bought it.

Anyway, I may end up just taking the damn thing apart and putting up pictures of each item separate so you guys don't have to deal with finding part numbers and crap. Just trying to avoid confusion.

Regarding the frame mounted petcock - I'm about 90% certain the one pictured has a leak and needs a new gasket or additional unicorn horn dust or something. Either of you still want it?

How does one "accidentally" buy a boat..? Lol. It's understandable, though.

I'll concede to fleshpiston on this one. The JB Weld seems to be holding on mine. Thanks, though! And good luck with the rest of the part out. I might be back lol.