News:

Protect your dainty digits. Get a good pair of riding gloves cheap Right Here

Main Menu

Rear Shock fitment

Started by beerwahboy, September 28, 2013, 03:11:03 AM

Previous topic - Next topic

beerwahboy

Hi fellows, My question is what is the difference to the rear shock for a GS 500e 1990 Mod. thru to GS 500 2007 mod. ?? Thanks for any help  John H.
G/day from Beerwah, Glasshouse Mountains Queensland Australia.

Twisted

Not really sure what you are asking but the rear shock from all the GS's are the same. If you want to mod the rear shock many use an R6 shock.

http://gstwins.com/gsboard/index.php?topic=52334.0

You should do an introduction thread so we can all say g'day. Beerwah as in near the Glasshouse Mountains?

codajastal

#2
Not all are the same Twisted. 89, 90 and 91? models are different :thumb:
If the shock comes from a model with the aluminium knuckle/dog bone it will not fit the models with the Steel knuckle/dog bones as they are different BUT the newer models will fit the older models :thumb:
adidasguy can tell you exactly what and why this is.
I am not interested in anything you have to say
Don't bother talking to me, I will not answer you

The Buddha

Quote from: codajastal on September 28, 2013, 04:06:05 AM
Not all are the same Twisted. 89, 90 and 91? models are different :thumb:
If the shock comes from a model with the aluminium knuckle/dog bone it will not fit the models with the Steel knuckle/dog bones as they are different BUT the newer models will fit the older models :thumb:
adidasguy can tell you exactly what and why this is.

The 89 and 90 had an aluminum knuckle.
I dont think the shock is different, just the knuckle.
The shock you are going to fit on a non aluminum knuckle will need a deep clevice - but r6, kat 6 etc etc are all deep clevice. So are all GSXR shocks. Shallow clevice shocks are too fet and far between ...

Cool.
Buddha.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

gsJack

407,400 miles in 30 years for 13,580 miles/year average.  Started riding 7/21/84 and hung up helmet 8/31/14.

The Buddha

That steel knuckle and short clevise isn't really much of an issue either, you can shave the knuckle.

Cool.
Buddha.
-----------------------------------------------------------------
I run a business based on other people's junk.
-----------------------------------------------------------------

codajastal

I am not interested in anything you have to say
Don't bother talking to me, I will not answer you

beerwahboy

It sounds like I'm in luck , I have a 1990 mod. So the 07 mod. shock from Ebay should fit.     thanks a lot.
G/day from Beerwah, Glasshouse Mountains Queensland Australia.

codajastal

Quote from: beerwahboy on September 28, 2013, 01:45:25 PM
It sounds like I'm in luck , I have a 1990 mod. So the 07 mod. shock from Ebay should fit.     thanks a lot.
Yes if you have a 90 model you can use any year you like :)
I am not interested in anything you have to say
Don't bother talking to me, I will not answer you

adidasguy

#9
Quote from: gsJack on September 28, 2013, 07:22:20 AM
Was waiting for Adidas, he must sleep in on Saturdays:

http://gstwins.com/gsboard/index.php?topic=59663.msg684424#msg684424

Been wrenching all day in the Bike Cave.
Gorilla and his father disassembled his bike. BrianRC put on new rubber.

...and you did have a link to where I posted it before. I could have written it again - bit would that mean you really like reading what I post?


[attachment deleted by admin]

SMF spam blocked by CleanTalk