News:

Need a manual?  Buy a Clymer manual Here

Main Menu

Gs500 part out

Started by Sycotravis, June 22, 2014, 06:51:52 PM

Previous topic - Next topic

Sycotravis

Well here goes don't wanna deal with my gs any more motor let go just not worth sinking any more money into it let me know what you all need here's a quick list id rather have local pickup but I guess I can ship parts if I have to here's list of what's on top of my head

Brand new regulator / rectifier $30

Aftermarket 37 mm clip ons $35

Brand new motion pro choke cable $10

01 gsxr tail with aftermarket Undertail side mount blinkers front and rear seats tail has 2 cracks repairable and subframe $150

Vance and Hines exhaust $150

K&N exhaust 30

Aftermarket round headlight with 37mm brackets very nice $75

Security ignition lock with round key $20 comes with 4 keys

Aftermarket non locking fuel door 25

Cr250X petcock brand new with fuel lines attached 25

Fuel tank was coated at one point by po needs to be done again no dents BO

Cleaned and jetted carbs for exhaust and intake just had them done 500 miles ago

09 r6 shock with pivot joint and all hardware very nice shape I never got around to installing $60

02 r6 rear tail fairing and Undertail all you need to do is modify frame a little bit and get front and rear seats 100

Front and rear tires 110-70-17 160-60-17 $60 nice shape only a few miles put on them


Like I said let me know what you need and where it's going and we will figure it all out

All items don't include shipping not trying to get rich I'm already losing out big time but that's how the game goes




Sent from my heart using my fingers

Nikkoortiz

tank doesn't have any rust

Sycotravis

I can see surface rust in it was done over with the tank product called kream it needs to be done again other wise in good shape


Sent from my heart using my fingers

GSnoober

How much for the gas tank?

How much for the carbs?

How much for the four colored indicator lights for turn signal, highbeam, neutral, and oil?

How much for shift lever?

How much for front brake lever?

How much for clutch lever?

Will you sell the gas tank with the CR250X petcock to combine shipping?

Thanks man, I need answers / prices soon. GSTwins member Philipp in Kelowna, BC is looking for a good gas tank, he'd probably want the petcock with it, and I need the other items. Will let you know shipping details in PM.

Thanks

noober

Sycotravis

Make offer on tank

Carbs $50

And just the lights or the whole bezel? Probably 20$

Shift lever 10$

Brake lever with perch  and master cylinder 15 or 25 for both levers

I would sell petcock with tank no problem

All does not include shipping I believe prices are fair


Sent from my heart using my fingers

iceman86

Can you PM the price to ship the V&H to Toronto, Ontario, Canada?

And to clarify this V&H will fits all GS500E/F (specifically GS500F 2005).
GS500F 2005 - Blue/White

Sycotravis

I will get a price ASAP and I don't see why it wouldint fit all years no problem


Sent from my heart using my fingers

GSnoober

Thanks for listing those prices; I expect Philipp in Kelowna will contact you soon about the tank and petcock. He is looking for a solid tank, something almost ready for paint, so I can't guarantee he'll want yours, but GS tanks are sometimes hard to come by, and vultures (Buddha?) are always ready to pounce on them. If you weren't 3000 miles away, I'd buy your bike outright. If you were closer to NC, Buddha would probably grab it.

BTW, what year is your GS? The engine and instruments are (obviously) pre-'97, but I would like to know what year the frame was made...

I'll take the carbs for $50 and the instrument bezel and indicator lights for $20 (plus shipping, of course; would you take $100 shipped? can't imagine it would be more than that), and pass on the three levers (shift, clutch and brake), mainly because I just remembered where I stored the box mine are in.

I'll send you a PM with an address to ship to; I'll be away from home for most of the next five or six weeks (possibly longer), so I've arranged to have a friend take delivery of the package and hold it for me until I can pick it up. I have a LOT of driving to do; no time for riding until I get home late July / early-to-mid August.

Please check your PMs later today, and thanks for replying so quickly.

noober / Ed

Sycotravis

I could do 100 shipped no problem 

I can package it all up nicely in one box I'll even throw in the speedo and tach even though the plastic around is broken I just need to get this all gone and get whatever short amount of cash gone so I can pick up my new bike and try and get my gixxer together

And my gs is a 91

Sorry if I didint answer all your questions and if you need any pics of anything I can do that




Sent from my heart using my fingers

Sycotravis

Also as for bike i would like to sell whole thing if anyone would want it before I rip it all apart would like 600 for it which is a steal but that probably won't happen if I need to pull apart so be it


Sent from my heart using my fingers

Nocluejoe

Do tires come with rim or are yo going to un mount the tire? Is it 60 for the pair?

Sycotravis

I have the stock wheels with 130 and 110  but I have an extra set of tires 160


Sent from my heart using my fingers

Sycotravis




Sent from my heart using my fingers

aflaskerud

Please tell me you still have your tires??

aflaskerud

And if you still have the tires...would they fit my 2004 GS500 ??

Sycotravis

The 160 and 110 yes I still have them and I would assume the fit


Sent from my heart using my fingers

wahoohaw

2008 GS500F with Jardine exhaust (small and fast)
2006 Jeep Grand Cherokee HEMI V8 (big and fuel unfriendly)

Sycotravis

New Bedford ma 02740


Sent from my heart using my fingers

iceman86

Quote from: iceman86 on June 24, 2014, 01:25:00 AM
Can you PM the price to ship the V&H to Toronto, Ontario, Canada?

And to clarify this V&H will fits all GS500E/F (specifically GS500F 2005).

Hello Sycotravis,

If you haven't had time to check the shipping cost please do not worry about it anymore.

I found something cheaper locally. I apologize for any inconvenience!

But someone should purchase that exhaust from you! Great deal and I know it sounds monstrous!

Goodluck!
GS500F 2005 - Blue/White

Zombie Toes

#19
I'm in need of the master cylinder for the front brake, the bracket that holds the tank down on the rear part of the tank, and the frame petcock. Can I get a picture and a price plus shipping to 65807 ?

SMF spam blocked by CleanTalk