FOR SALE! AND GO!!! I can put reserves on parts for people up to 2 weeks!
DISCLAIMER: The earliest I can get parts off and sent out is the weekend of March, 13

For sale is a 1993 GS500E with many parts/upgrades, ~24,000 miles
DISCLAIMER: Runs, but I'm tired of futzing with the carbs so in its current state it runs REALLY rough and needs a new battery.


Parts List (Upgrades only):
-Engine/Fueling:
Factory Pro tune kit and Carbs (extra 150 size mains)
K&N Lunchbox filter
V&H Supersport exhaust
Pingel High flow tank petcock and adapter plate

-Handling:
Front forks with .85kg/mm sonic springs
Thick billet fork brace
GSX-750 rear shock 
Never Used Vortex clip ons
Katana 600 rear wheel w/brand new bridgestone s20 150/60 and wave rotor
GS500 front wheel w/brand new bridgestone s20 110/70
Stainless steel brake lines front/back
Katana brake torque bar

-Frame/controls:
SV650 Master cylinder (front) w/lever
SV650 clutch perch w/lever and cable
GSXR-600/1000 right and left rear sets w/adapter plates, hardware, custom adjustable linkage (L) and master cylinder (R)
Custom rear under tray w/LED taillight, seat lock w/keys, license plate bracket, and riv-nuts (Can tuck all electronics inside)

Parts (Stock):
Frame-Local pickup/delivery (extra) only, clean title
Engine-Local pickup/delivery (extra) only, runs just fine

Seat
Wiring harness x 2
Rectifier
CDI
Turn Signal Relay
Secondary relay
Starter solenoid
Headlight
Tach/speedo w/housing and lights
Left hand control
Right hand controls w/throttle tube and cable
Carbs (Drilled out caps) Factory pro tune kit included, just rebuilt with K&L rebuild kit
Tank, minor rust around the fill hole (Evaporust works amazing to get it out)
Triple clamps
Rear brake assembly (including mountig bracket)
Front brake assembly
Rear axle w/spacers and hardware
Front axle w/spacers and hardware
Speedo cable and sensor
Tach cable
Ignition coils w/cables x 2
Stock rear light
Stock turn signals
Fuel petcock (Vacuum assembly removed)
Battery Box
Custom rear axle adjusters with spools
Black anodized keyless quick filler for gas tank

(All necessary hardware will come with their respective parts)



[attachment deleted by admin]

Ill put dibs on the headlight, brackets, and front forks, if it gets parted out. 

I'm interested in the left hand control, the front springs (if the Fink didn't want those with the forks), and possibly the V&H exhaust

Quote from: BikerMedic on February 21, 2015, 06:29:35 AM
I'm interested in the left hand control, the front springs (if the Fink didn't want those with the forks), and possibly the V&H exhaust

The left hand controls from the first gen SV650s are direct bolt on's for the GS500. I know for a fact. there's other bikes too. but the sv650 I know fits.

Quote from: J_Walker on February 21, 2015, 07:13:29 AM

Quote from: BikerMedic on February 21, 2015, 06:29:35 AM
I'm interested in the left hand control, the front springs (if the Fink didn't want those with the forks), and possibly the V&H exhaust

The left hand controls from the first gen SV650s are direct bolt on's for the GS500. I know for a fact. there's other bikes too. but the sv650 I know fits.

Good to know, thanks!

Quote from: BikerMedic on February 21, 2015, 06:29:35 AM
I'm interested in the left hand control, the front springs (if the Fink didn't want those with the forks), and possibly the V&H exhaust

I don't need the springs, Im actually just after the left tube, I have one that's bent.

how much for the right hand controls and speedo/tach assembly and cables?

I call dibs on the rearsets!

-snip-

Dibs on the Tank, unless I missed out. How much are you asking? I live in the PacificNW, btw, for shipment.

Cheers!

BUY MY STUFF! I am parting out my bike this coming weekend so I can guarantee shipment very soon!!

I'm interested in:

"SV650 Master cylinder (front) w/lever
SV650 clutch perch w/lever and cable
GSXR-600/1000 right and left rear sets w/adapter plates, hardware, custom adjustable linkage (L) and master cylinder (R)"

Can I get some close-up pics and how much $$?

Thanks,
Iarn

How much for the katana wheel and brake arm? I PM'd ya!

Buy my stuff! Its getting close to time to strip down and send out parts. After this weekend I won't be around the bike for a while.

I'm interested in the exhaust and jets.

Can I see pics of the rear under tray?
How much do you want for it?
How much do you want for the Pingel Petcock?

THIS IS THE LAST WEEKEND I'LL BE ABLE TO SEND OUT ANY PARTS BEFORE I LEAVE THE COUNTRY FOR SEVERAL WEEKS!

pics of clip ons? and price?

How much for the carbs? Can I throw them on a stock 93 and tune them?

Last call before I leave this week! And please PM me if you want a part or are interested/want more pictures.