Where can I get frame sliders/ savers for a GSe

[cyclin-scott]

I've search the threads on frame sliders, but all I've found is threads for F's.

I'm looking for sliders for my '98 GSe. If anyone knows where I might be able to find some specific ones for my bike or can tell me what sliders will fit, I'd appreciate it.

Thanks, Scott

[Alphamazing]

I've got SW-Motech 3-pointers.

My thread: http://gstwins.com/gsboard/index.php?topic=22851.0

Buy them at: http://www.twistedthrottle.com/trade/productview/1998/101/

[NiceGuysFinishLast]

*must.... control.... trigger..... finger.....*

Nice save Alpha, nice save!

[melloGS]

there was post on here a while ago about frame sliders for the GS...even had a video on installation...i can't find it though

[nick_villan]

aint it just a waste of time for our bikes, cause they really font work from what i read some were

[cyclin-scott]

Thanks for the links, Alpha ...

*must.... control.... trigger..... finger.....*

Nice save Alpha, nice save!

Remind me not to ask you for help ... ass

[CRXDrew]

Damn...more than 100 bucks for some metal tube and flat bar with holes in it?

I really need to get home and make some of these.

[Phaedrus]

aint it just a waste of time for our bikes, cause they really font work from what i read some were

I think you are talking about the F models, Nick. There are not any made that will fit the F models (that I know of) because of the fairing. You can get some fairing protectors - the same ideas as frame sliders - but not as powerful and only really effective in knock-overs or real slow speed spills, nothing serious. More like little stoppers on a roller skate.

For the naked E models, I am sure the ones Alpha pointed out and has work beautifully 

[NiceGuysFinishLast]

Thanks for the links, Alpha ...

*must.... control.... trigger..... finger.....*

Nice save Alpha, nice save!

Remind me not to ask you for help ... ass

Chill.. it was a JOKE.. you got the information you needed, didn't you? If Alpha hadn't already given you the information you needed, I'd have done the search and given it to you. I was simply making a statement about the fact that a 3 second search would have given you the answer quicker than posting a new thread and waiting for a response. Upon closer inspection of your post, I realized that the reason the search didn't work for you was because you were searching the wrong terms. Case guards and frame sliders are two completely different things. So I'm sorry about that, that was my bad, assuming others know as much as I do (which is next to nothing), but you need to learn to take a joke. I posted the smileys to show I was kidding. I could have made a snarky comment like "search noob!" or a really cool animated gif that shows the search function..

/rant

[Alphamazing]

there was post on here a while ago about frame sliders for the GS...even had a video on installation...i can't find it though

That was a video for sportbikes in general, but it required cutting the fairing, a general no-no.

aint it just a waste of time for our bikes, cause they really font work from what i read some were

For the F model, yes, but for the E model case guards are quite useful, as I have proven so well in the thread I posted above.

Thanks for the links, Alpha ...

No problem! They are really nice guards, although they are VERY expensive in comparisson to the Suzuki Factory ones (not made, but were ~$50 when they were). You can find the Suzuki ones on eBay every now and again, and they usually sell for about $70 for the set. There's one on there now, too. I'd bid on those first and then go for the SW-Motech ones if you still want. $120, but I thought they were worth it.

Damn...more than 100 bucks for some metal tube and flat bar with holes in it?

I really need to get home and make some of these.

Yeah, they seem easy, but it's the angle and durability that's hard to get. You might have experience in that sort of thing, but it's probably more trouble than it's worth. If you COULD make some, I'd say go with the 2-pointers and sell them to people on the board. You'd make a lot of people happy, I bet.

[cyclin-scott]

Thanks for the links, Alpha ...

*must.... control.... trigger..... finger.....*

Nice save Alpha, nice save!

Remind me not to ask you for help ... ass

Chill.. it was a JOKE.. you got the information you needed, didn't you? If Alpha hadn't already given you the information you needed, I'd have done the search and given it to you. I was simply making a statement about the fact that a 3 second search would have given you the answer quicker than posting a new thread and waiting for a response. Upon closer inspection of your post, I realized that the reason the search didn't work for you was because you were searching the wrong terms. Case guards and frame sliders are two completely different things. So I'm sorry about that, that was my bad, assuming others know as much as I do (which is next to nothing), but you need to learn to take a joke. I posted the smileys to show I was kidding. I could have made a snarky comment like "search noob!" or a really cool animated gif that shows the search function..

/rant

I think that I'm quite old enough to know how to take criticism. I wouldn't get very far in my line of work if I didn't. So, thanks, but I don't need to learn a life's lesson from a forum.

Anyway, the reason that I didn't take it as an all out joke is b/c I stated in my original post that I DID a search (of this forum) and the postings that I found were all about sliders for the F's and mostly newer bikes. (ie I didn't find the information that I was looking for ...)

No, I don't know as much as you. No, I haven't been riding as long as you. And yes, I'm sure that your dad can beat up my dad ... but that's why I joined this forum. To learn from those with experience. Sorry if I came across as someone that couldn't take as joke ... obviously you don't know me, just as I dont' know you. I started this thread looking for information that I didn't find on my own (hence why I posted in the first place), not to be poked at b/c I didn't know something you already did.

Now, with that said ... I appreciate all the advice given. I've already ordered my sliders and they're on their way.

[Phaedrus]

You are going to fit in just right here cyclin-scott 

[cyclin-scott]

You are going to fit in just right here cyclin-scott 

Thank you, thank you ... I'll be here all week. 

[CRXDrew]

Yeah, they seem easy, but it's the angle and durability that's hard to get. You might have experience in that sort of thing, but it's probably more trouble than it's worth. If you COULD make some, I'd say go with the 2-pointers and sell them to people on the board. You'd make a lot of people happy, I bet.

I do have experience doing this kind of thing.... and I was planning on making a 2 point version like the one that was on ebay recently. I'll make a set and a jig for future sets. I'll end up selling these for a lil more than cost of materials plus a few bucks worth of time. Hmm... I have time after next week to go home.. perhaps i'll go make a set as an example and work from there with marketing. Also I was thinking about making a sriath bar thingy. If hes not making em and the demand is there I could crank out a few of those aswell

[NiceGuysFinishLast]

I think that I'm quite old enough to know how to take criticism. I wouldn't get very far in my line of work if I didn't. So, thanks, but I don't need to learn a life's lesson from a forum.

Anyway, the reason that I didn't take it as an all out joke is b/c I stated in my original post that I DID a search (of this forum) and the postings that I found were all about sliders for the F's and mostly newer bikes. (ie I didn't find the information that I was looking for ...)

No, I don't know as much as you. No, I haven't been riding as long as you. And yes, I'm sure that your dad can beat up my dad ... but that's why I joined this forum. To learn from those with experience. Sorry if I came across as someone that couldn't take as joke ... obviously you don't know me, just as I dont' know you. I started this thread looking for information that I didn't find on my own (hence why I posted in the first place), not to be poked at b/c I didn't know something you already did.

Now, with that said ... I appreciate all the advice given. I've already ordered my sliders and they're on their way.

Haha, you took my apology all wrong. I realized after my original post that you had searched the wrong thing, which was why you had to post a thread, and that's why I apologized. As for the things I bolded above, let's take em in order.

1. Like I said, I didn't realize that till after, that's why I apologized.

2A If you don't (which you probably do) you will, very soon, that's what this forum is for

2B Funny thing.. you've been riding longer than me.. I'm a nood (nood = noob, but worse, because I don't actually own a bike right now)

2C I highly doubt it.. my dad's kind of a wuss...

So I hope that clears the air, I wasn't trying to me a smart ass, just funny, and evidently, I failed.. 

[cyclin-scott]

I think that I'm quite old enough to know how to take criticism. I wouldn't get very far in my line of work if I didn't. So, thanks, but I don't need to learn a life's lesson from a forum.

Anyway, the reason that I didn't take it as an all out joke is b/c I stated in my original post that I DID a search (of this forum) and the postings that I found were all about sliders for the F's and mostly newer bikes. (ie I didn't find the information that I was looking for ...)

No, I don't know as much as you. No, I haven't been riding as long as you. And yes, I'm sure that your dad can beat up my dad ... but that's why I joined this forum. To learn from those with experience. Sorry if I came across as someone that couldn't take as joke ... obviously you don't know me, just as I dont' know you. I started this thread looking for information that I didn't find on my own (hence why I posted in the first place), not to be poked at b/c I didn't know something you already did.

Now, with that said ... I appreciate all the advice given. I've already ordered my sliders and they're on their way.

Haha, you took my apology all wrong. I realized after my original post that you had searched the wrong thing, which was why you had to post a thread, and that's why I apologized. As for the things I bolded above, let's take em in order.

1. Like I said, I didn't realize that till after, that's why I apologized.

2A If you don't (which you probably do) you will, very soon, that's what this forum is for

2B Funny thing.. you've been riding longer than me.. I'm a nood (nood = noob, but worse, because I don't actually own a bike right now)

2C I highly doubt it.. my dad's kind of a wuss...

So I hope that clears the air, I wasn't trying to me a smart ass, just funny, and evidently, I failed.. 

Uhh ... here's a qoute, to a qoute, to a qoute ... oh, hell. I'm lost ...

Anyway, YEAH BEER TOAST! (Here's to wussy dad's! )

[NiceGuysFinishLast]

I think that I'm quite old enough to know how to take criticism. I wouldn't get very far in my line of work if I didn't. So, thanks, but I don't need to learn a life's lesson from a forum.

Anyway, the reason that I didn't take it as an all out joke is b/c I stated in my original post that I DID a search (of this forum) and the postings that I found were all about sliders for the F's and mostly newer bikes. (ie I didn't find the information that I was looking for ...)

No, I don't know as much as you. No, I haven't been riding as long as you. And yes, I'm sure that your dad can beat up my dad ... but that's why I joined this forum. To learn from those with experience. Sorry if I came across as someone that couldn't take as joke ... obviously you don't know me, just as I dont' know you. I started this thread looking for information that I didn't find on my own (hence why I posted in the first place), not to be poked at b/c I didn't know something you already did.

Now, with that said ... I appreciate all the advice given. I've already ordered my sliders and they're on their way.

Haha, you took my apology all wrong. I realized after my original post that you had searched the wrong thing, which was why you had to post a thread, and that's why I apologized. As for the things I bolded above, let's take em in order.

1. Like I said, I didn't realize that till after, that's why I apologized.

2A If you don't (which you probably do) you will, very soon, that's what this forum is for

2B Funny thing.. you've been riding longer than me.. I'm a nood (nood = noob, but worse, because I don't actually own a bike right now)

2C I highly doubt it.. my dad's kind of a wuss...

So I hope that clears the air, I wasn't trying to me a smart ass, just funny, and evidently, I failed.. 

Uhh ... here's a qoute, to a qoute, to a qoute ... oh, hell. I'm lost ...

Anyway, YEAH BEER TOAST! (Here's to wussy dad's! )

Well, I just quoted your quotes of a quote of.... forget it, I need a beer! 

[NiceGuysFinishLast]

Oh yeah, completely off topic.. where'd you get your avatar?

[cyclin-scott]

Oh yeah, completely off topic.. where'd you get your avatar?

YEA BUDDY!!!! Here's to the first comment on my "tank mod" avatar!!! 

Uhh, to answer your question ... I think it's a pic from www.uponone.com  ... yea, yea. I'm guilty of looking at pics of chicks on bikes! ...

... now go look for yourself! (hehe)

[Unnamed]

By the way, it is possible to drink a gallon of milk in an hour. My brother did it a couple months ago, and he's got pictures to prove it.