If you want something please PM me. It's the best way cause not having Internet makes it hard to read every post in this thread.
Paypal only!
Exhaust>>>>SOLD<<<<<<$125 plus shipping
(http://s21.postimg.org/ltifpbs7b/IMG_1556.jpg)
(http://s18.postimg.org/5gfelasu1/IMG_1557.jpg)
(http://s10.postimg.org/mcrzjobrd/IMG_1558.jpg)
(http://s14.postimg.org/3y8vcds4h/IMG_1559.jpg)
(http://s24.postimg.org/c84y34hwl/IMG_1560.jpg)
(http://s7.postimg.org/duhwfxmej/IMG_1561.jpg)
(http://s12.postimg.org/qdyx7lhil/IMG_1562.jpg)
(http://s21.postimg.org/iopusxytj/IMG_1564.jpg)
Plastics $$$ make offer
(http://s21.postimg.org/grxq23xjb/IMG_1565.jpg)
(http://s23.postimg.org/xm0mitorf/IMG_1566.jpg)
(http://s12.postimg.org/emk8oa1nx/IMG_1567.jpg)
(http://s18.postimg.org/62n7jqyd5/IMG_1568.jpg)
(http://s10.postimg.org/4ksduvdrt/IMG_1569.jpg)
(http://s1.postimg.org/4bhkubflb/IMG_1570.jpg)
(http://s21.postimg.org/4nw8qcosn/IMG_1571.jpg)
(http://s14.postimg.org/qz7jijf6p/IMG_1572.jpg)
One tab broken on left side.
(http://s22.postimg.org/pjpf47n2p/IMG_1573.jpg)
K&N Lunchbox $25>>>>>>>SOLD<<<<<<<<
(http://s10.postimg.org/5buas4uwp/IMG_1575.jpg)
(http://s12.postimg.org/3qxg6o63x/IMG_1576.jpg)
(http://s24.postimg.org/nw4ie5uat/IMG_1577.jpg)
(http://s7.postimg.org/6ay05d7zf/IMG_1579.jpg)
Other stuff $$$ make offer
(http://s14.postimg.org/3tx4wja1t/IMG_1585.jpg)
(http://s21.postimg.org/w00oj68av/IMG_1586.jpg)
(http://s13.postimg.org/vpi5evp8n/IMG_1591.jpg)
It is stuck
(http://s17.postimg.org/m5gwb3bi7/IMG_1592.jpg)
There is a short in the wire with blue tape on it.
(http://s10.postimg.org/wu7uaay61/IMG_1587.jpg)
(http://s9.postimg.org/fqjr70ppb/IMG_1588.jpg)
(http://s8.postimg.org/q0zuupqh1/IMG_1589.jpg)
(http://s16.postimg.org/axaxil0b9/IMG_1593.jpg)
(http://s22.postimg.org/6gfe9l1n5/IMG_1594.jpg)
(http://s8.postimg.org/67nr20d39/IMG_1595.jpg)
Make an offer on anything you want. I just want to get rid of it and make a little money back. Shipping can be USPS or UPS and I can get quotes but I don't have much free time during the week. I am in Alamogordo, NM 88310 if you want to look into shipping yourself. Sorry no international shipping...its just too much of a hastle.
Quote from: harrypotter on April 05, 2013, 09:26:42 PM
Quote from: harrypotter on February 17, 2012, 01:58:45 AM
Little update on me. Came back to the states in july 2011. Barley put 15 miles on the GS after the crash. It ran like dog butt. Haven't put gas or a battery back in it after shipping it back stateside. Think a valve may be bent also. I have been spending all my time and money into rebuilding my Nissan 240sx. Will have to get a different jet kit and a new pet chicken before I try to get it on the road again.
I have kind of lost interested in riding though. So I may not even waste my time and money trying to get it running. May just end up parting it out. I was always frustrated by the hanging idle problem of the GS. If I ever get a bike after this it will be fuel injected.
Yeah I still haven't tried to get it to run. Less than 25 miles on it after a rebuild that cost me over $2,000. Time to part it out and take the huge loss. It don't run and haven't worked on it in over three years. Things are still decent on it just Okinawa weather made it rust a lot. Let me know if you need any parts. Going to take it out of the garage and get pictures and prices soon.
Original crash and rebuild thread is here: http://gstwins.com/gsboard/index.php?topic=50499.0
Clean Florida Title in my name VIN JS1GM51A3T2100085
Right Side
(http://s18.postimg.org/tbisv0rnd/IMG_1555.jpg)
Left Side
(http://s17.postimg.org/d7xx25o1r/IMG_1537.jpg)
Front
(http://s13.postimg.org/52brx16cn/IMG_1544.jpg)
(http://s21.postimg.org/bw0zd0cbb/IMG_1545.jpg)
(http://s22.postimg.org/z5smvcmsh/IMG_1546.jpg)
Should be about 1,000 miles more on it than this. This is from having to get a new gauge after the crash.
(http://s17.postimg.org/wjevf0bun/IMG_1547.jpg)
Tank
(http://s18.postimg.org/9em2djnjt/IMG_1554.jpg)
My (blank) dented it during the crash!
(http://s24.postimg.org/8mifc6fsl/IMG_1553.jpg)
Exhaust
(http://s22.postimg.org/vwe7ovyox/IMG_1540.jpg)
(http://s14.postimg.org/6p70bpybl/IMG_1539.jpg)
(http://s10.postimg.org/6l4n3ncd5/IMG_1541.jpg)
(http://s11.postimg.org/991ztzjxf/IMG_1548.jpg)
(http://s24.postimg.org/d68g2x1th/IMG_1542.jpg)
(http://s22.postimg.org/qikhegfa9/IMG_1543.jpg)
Buddha jet kit in there.
(http://s21.postimg.org/s7t435e1j/IMG_1549.jpg)
Engine emblems ----Sold
(http://s15.postimg.org/54qlmy6bv/photo_1.jpg)
(http://s3.postimg.org/7d2o1jc1v/photo_2.jpg)
Engine crash bars ---Sold----really heavy and thick metal. Never installed but has scrath marks from shipping and storage. Bought these from ecpreston for $82 shipped in may 2010.
(http://s17.postimg.org/ixwzot4ov/photo.jpg)
Turn signals >>>Sold<<<never installed. I liked them from this build thread so I bought some on ebay. Think I paid less than $50 shipped for them. http://gstwins.com/gsboard/index.php?topic=52488.msg593755#msg593755
(http://s22.postimg.org/i2qbj7n1d/photo_4.jpg)
(http://s16.postimg.org/9p3hyx1lh/photo_3.jpg)
Lots of parts still available, let me know what you need cause I need this whole bike gone so I haave space in the garage to build my car.
Sold so far:
Exhaust
Headlight and mounts
Front turn signals
Carbs
Crash bars
Aftermarket turn signals
Engine decals
Pending sale:
Gauges
How much for the Lunch Box and the emblems posted to Queensland Australia?
If you wont send international then how much to ship to Adidas in Seattle?
I am sure he can send it to me?
How much for yer exhaust? Shipping to the UK!
Quote from: Destiny2191 on April 06, 2013, 08:37:40 PM
How much for yer exhaust? Shipping to the UK!
No international shipping :(
What do you want for the exhaust? I am in SoCal..
Quote from: Calpantera on April 07, 2013, 11:56:06 AM
What do you want for the exhaust? I am in SoCal..
If I can get it off without damaging it what do you think about $125 plus shipping?
Ill take the the right and left side engine covers, How much? Ive been looking for black ones.. Shipping to 74116
Quote from: Beemersworld on April 07, 2013, 08:41:14 PM
Ill take the the right and left side engine covers, How much? Ive been looking for black ones.. Shipping to 74116
I will take detailed pictures of them after work and then we can come up with a price. I really don't know how much they are worth.
I'd like the engine emblems and the turn signals.
how much do you want for them?
PM sent.
Quote from: harrypotter on April 07, 2013, 06:58:43 PM
Quote from: Calpantera on April 07, 2013, 11:56:06 AM
What do you want for the exhaust? I am in SoCal..
If I can get it off without damaging it what do you think about $125 plus shipping?
I am going to have to pass, kinda ran over budget on the bike over the weekend.. :)
Took some parts off yesterday so I could get better pictures of them. Haven't uploaded the pictures yet but here is a video.
How much for just the levers?
Quote from: heisenbergo on April 13, 2013, 12:51:49 AM
How much for just the levers?
The brake and clutch? How about $15 plus shipping? They are both scratched up though. You should watch the video of them
Pmd
Sent from my SCH-I535 using Tapatalk 2
How much do you want for the crash bars?
Would 30 bucks be enough to snag that gauge cluster?
how much for the crash bars shipped to 12590?
So what's stuck on the carbs?
PM'd you regarding the crash bars.
Hey what do you think shipping would be for the exhaust to 34746? Definately interested
Mary
Hello? I've PM'd ya what's up I want that exhaust!
Mary
Quote from: GI_JO_NATHAN on April 16, 2013, 07:48:29 PM
So what's stuck on the carbs?
Think the butterfly is stuck open, also been sitting for over three years. I have no use for them so if you want them $10 plus shipping is good.
Quote from: mustangGT90210 on April 15, 2013, 10:47:24 AM
Would 30 bucks be enough to snag that gauge cluster?
$30 plus shipping would be fine, where you at?
Quote from: Toogoofy317 on April 18, 2013, 11:52:23 AM
Hello? I've PM'd ya what's up I want that exhaust!
Mary
Sorry I don't have Internet at home. So all I was doing was checking for PM's every few days.
Quote from: harrypotter on April 18, 2013, 04:18:36 PM
Think the butterfly is stuck open, also been sitting for over three years. I have no use for them so if you want them $10 plus shipping is good.
Deal. PM sent
PM sent about headlight.
still have the carbs? ill take them if you do
I sent you a PM about the exhaust earlier this week. Just making sure it actually sent :)
Quote from: metalreeper on April 20, 2013, 08:06:33 AM
I sent you a PM about the exhaust earlier this week. Just making sure it actually sent :)
Must have overlooked it but here is some info on shipping and price.
I will take no less than $125 for the exhaust.
In the box it is 20lbs and measures 39x13x15 you can get a quote online from USPS. My zip code is 88310.
toogoofy also was sending you PM's about the exhaust. Did you get back to her?
Quote from: adidasguy on April 20, 2013, 12:39:20 PM
toogoofy also was sending you PM's about the exhaust. Did you get back to her?
Yes
Quote from: harrypotter on April 20, 2013, 12:43:12 PM
Quote from: adidasguy on April 20, 2013, 12:39:20 PM
toogoofy also was sending you PM's about the exhaust. Did you get back to her?
Yes
Thank you. She was asking me what I thought of the one I have on Junior. I know she was very interested in it.
I calculated the price with standard usps shipping to my address and its $30.21 .. If you still have it by 4/26/13 I would like to buy it.
Pmed about the exhaust
Sent from GS3
Lots of parts still available, let me know what you need cause I need this whole bike gone so I haave space in the garage to build my car.
Sold so far:
Carbs
Crash bars
Aftermarket turn signals
Engine decals
Exhaust
Headlight and mounts
Front turn signals
Pending sale:
Gauges
Quote from: harrypotter on May 01, 2013, 02:28:44 PM
Lots of parts still available, let me know what you need cause I need this whole bike gone so I haave space in the garage to build my car.
Sold so far:
Carbs
Crash bars
Aftermarket turn signals
Engine decals
Exhaust
Headlight and mounts
Front turn signals
Pending sale:
Gauges
If that sale with the gauges doesn't go through :whisper: I'd like to get them. Also how much do you want for the front fender, front brake master cylinder and seat? I'm in Tallahassee, Fl.
My apologies to those still waiting shipping quotes. Something came up and I am out of town until early July.
PM'd you about the fuel tank. I see that you are out of town till july so im guessing nothing being shipped out till then (thats a long time).
Willing to separate indicator panel from guages?
Sent from my PC36100 using Tapatalk 2
Quote from: jcube_04 on June 23, 2013, 09:16:07 PM
Willing to separate indicator panel from guages?
Sent from my PC36100 using Tapatalk 2
Yes, but it is in bad condition. Just cover shipping and I will get it to you. Zip code?Same goes for everything left. I am more concerend about garage space and hooking people up than getting money. Problem is I work the same time the post office is open so the only day I can send things out is Saturdays. If you are local to me then come pick the stuff up! Frame is in decent shape and I have a clean tiltle for it.
I might take your frame covers (im missing the center piece) how much you want for those? If the gas tank is not dented I might take that off your hands too.
Quote from: dr_patso on July 27, 2013, 12:30:13 AM
I might take your frame covers (im missing the center piece) how much you want for those? If the gas tank is not dented I might take that off your hands too.
Tank is dented and rusty. What frame covers are you talking about? The plastic ones?
MSG about the headlight assembly and turn signals.
Let me know
Quote from: Courtice_GS500 on August 01, 2013, 05:32:00 AM
MSG about the headlight assembly and turn signals.
Let me know
Those have already been sold...sorry.
Quote from: harrypotter on July 29, 2013, 08:17:03 AM
Quote from: dr_patso on July 27, 2013, 12:30:13 AM
I might take your frame covers (im missing the center piece) how much you want for those? If the gas tank is not dented I might take that off your hands too.
Tank is dented and rusty. What frame covers are you talking about? The plastic ones?
the red plastic frame covers yes! I will PM
(http://s21.postimg.org/grxq23xjb/IMG_1565.jpg)
OP get tired of shipping and selling parts? Still interested in the frame covers.
... never mind me...
- Bboy
Quote from: dr_patso on August 12, 2013, 11:15:50 PM
OP get tired of shipping and selling parts? Still interested in the frame covers.
I got tired of not having space in the garage to work on my car, bike is gone now. Sorry to all that were wanting parts and waiting on replies to PM's. Just can't justify trips to the post office during work hours or during the weekend that is dedicated to time with my daughter. I was stationed overseas for three years and then deployed for ten months, that was a lot of time away from her. Needless to say I had to choose my priorities and it was her and working on her car.
This is most likely my last post on the site as I am not getting another bike...it was fun and you guys are awesome, best of luck!