alright so assuming the laser shop gets they're part done, how long does it usually take from that point to get them shipped? this lovely can i now have is just dieing to be on the gs. also from an earlier post i u made is $50 going to cover the flange? ($40 for the flange, $8 for shipping, $2 for paypal)

yf

It was high exit to begin with, then someone complained it was too high or some like that, from a pic someone else posted. Then I started making it a bit more sano ... then people said high exit was cool, and I had to have people specify high or not, then I now am making it all high again ... so hope your utrn signals are fire resistant ...
Cool.
Srinath.

[6

funny how a "statement" gets answered before a question that HAS to be answered before they can even be sold.....

Sweet!!! Burn signal light burn!!! I'll be in a permanent right turn indication... LOL 
The angle at which the can sat was one of my concerns... but at this price, I wasn't going to complain! 

got any pics of the approximate angle we're getting?

thanks

Quote from: snap on April 04, 2006, 08:32:08 AM
funny how a "statement" gets answered before a question that HAS to be answered before they can even be sold.....

You using sarcasm boy ....      ...
Cool.
Srinath.

sarcasm would be saying something to mean something else, i meant what i said. i've been trying to get this ? answered for weeks and it doesnt even get a reply.....

Whats the question?

I want a flange. Count me in.

YAY!!! that puts us up to what... 10 or 11 now Srinath??? LOL

almost to 20! Come on guys and gals, you know you want an aftermarket can on your GS! As cheap as those Wileyco's are on eBay and since Srinath is making some flanges up... this is a great 'thrice' in a lifetime offer we got here!! 

BTW Sri. do you want payment now?... if so, let me know how much for shipping to Winnipeg, Manitoba, Canada. Postal code R3J 3V5 and I'll fork the green over 


  All Hail the mighty flange 

A noob question here.
I currently have K&N filter (drop in) with rubber restrictor and not rejetted. I was told that if I get the srinath flange with the choker, I don't have to rejet. Is that true? because I have no idea how to rejet and I rather not touch the carb if I don't have to. I just want the wileyco for louder sound but if not rejetting will screw up the performance of the bike, I'd rather keep it the way it is. Any help? thoughts please?

Well if you aren't looking for performance, then ya sure, you can get the flange with choker and slap on a Wileyco on there and it'll sound just cherry! 

But with a K&N already on there and if you're going to bother to pay for a Wileyco,  you may as well go the extra little bit and do a rejet to avoid loosing performance....

but if you are satisfied with the current output of your GS, then a choker with a Wileyco should keep it close to where it is now.

What's your paypal address Srinath

Flat shipping? Cuanto cuesta to 19154.

thanks banjo

ps - still taking orders?

Hmm... idk if I want to mess with my exhaust and jetting yet... 

screw it put me down for one 

might as well take it while its here, and if I never use it, I'm sure someone else would take it off my hands

OK Lemme answer them all ...
Snap - $50 will cover it. How long ... no clue ... as with all the rest of the things I have made ... it will get done, just no idea when. Its essential if I dont want to blow the costs to work with people on their terms. Laser guys have a 1000 piece minimum. he squeezes in my 20 via back door and drops it in the gaps between bigger bits he's cutting, muffler shops too use slack time to make my 20. A muffler shop makes most of their $$$ slapping 6K spinners and 2K stainless headers on Bling bling Navigators ... like WTF ... My 20 bits of pipe dont bring in the big $$ no matter what I pay them ...
My welders life revolves around his new baby and 5 year old daughter. I use his shop till I am ready to bring him in to weld ... big privilege and I need to work with him on that. just dont take my time commitments too seriously and its going to get done and sent to you ... heck I even send it free sometimes, after not cashing a bunch of checks from last year ...  ... OK No promises ... but has happened in rare cases.
Now y'all dont run around ordering "free" flanges ...

Samkhang - K&N and didn't rejet ... bad enough, why make it worse with pipe ... I'll drop a choker in it, you may want to like make a bigger choker (heck I'll put on in there that's super sized ... but I'd rather be the one to tell ya ... rejet - almost neccesary on a stock bike.

LimaXray - Rejet it when you can. I'll choke the flange and it wont be terrible, but stock bike needs a rejet.

Bbanjo - and others - paypal is seshadri_srinath@hotmail.com. But please wait till I get from laser shop and then send it in. I'll put a pic up. $50 will cover the 50 states. canada - yea need more $$$ freaking $$$ to send there.

Joedude - It usually exits a 2-4 inches below the t/s. It starts out a bit below where the stock muffler starts. Then just use your imagination. Someone posted a pic before ... dont know who and where it is.
Cool.
Srinath.

Quote from: seshadri_srinath on April 05, 2006, 10:22:34 AM
Snap - $50 will cover it.

Alright thats what i needed to know. I'll get you some money this week.

Thanks.

Right on. Just bought a CF can. I'm all goosebumby

banjo

Count me in, just need to find a pipe, but I'm definitely in for a flange.

Thanks for the answers guys. I just ordered SUZUKI GSX 1200 WILEYCO STAINLESS  from the guy on ebay for $85+15 for shipping. Thanks to joedude for the effort on getting the deal for $85.

Now, one last question, I am  getting the flange with the choker for now so that I don't have to rejet yet but if I decided to do it later, do I have to remove the choker (is it removable)? or is it something that I can leave it there but remove the restictor from K&N filter instead? What alteration do I need to do if I want to rejet in the future?