hi every one,
I've been a long time reader and first time post! I'd like to thx everyone with there information to get where I am right now. Just felt like sharing what I have done up to now! would like to have some feedback about my mods. and maybe some suggestions 

Suzuki GS500F 2004

-JARDINE RT1 STAINLESS FULL EXHAUST SYSTEM
-REJET MIKUNI > 22.5/65/147.5
-K&N AIR FILTER > LUNCHBOX
-GALFER STAINLESS STEEL BRAIDED FRONT/REAR BRAKE LINES
-PROGRESSIVE SPRINGS w/ 15W oil
-15T FRONT SPROCKET
-NGK IRIDIUM IX DPR8EIX-9 SPARK PLUG

-R&G frame sliders
-Suburban Machinery 2 bars (SM2)
-carbon fiber style GSRX mirrors
-ProGrip 719 Gels Sportbike Grips
-Silverstart H4 headlamp
-Hyperwhiteled parking front light
-Cool blue tachlight LEDs
-intergraded tail turn signal
-lockhart phillips licence plate turn signal
-smoke tail light lens w/red leds
-front lockhart phillips short stalk V turn signal
_______________________________
maybe some Mods for next summer... still thinking about it:
-katana REAR wheel swap with Michelin Pilot Race H2 150/60ZR17
-front Michelin Pilot Race H2 110/70ZR17
-katana rear shock
-HID 8000K

















Some of my fellow riders with a zx6r-2007 and gsxr 2006

Welcome!

Your bike looks good, but I can only see the last picture in your post for some reason.

Looks good, the katana shock is super sweet, but I would advise against the PP Race tires,  DOT approved race tire suck on the streets, they never get hot enough to get good grip. Stick to street tires and you will be much happier

sweet bike. nice mods. but try to post pictures again - they don't work...

changed the size of the pictures, does it appear now? 

Nice looking bike!   

good looking bike

Very pretty looking vehicle.
Even though I'm not a fan of faired GS's (rather the opposite as well), I love the colour scheme, the tiny turn signals, and the fenderectomized tail looks very very clean and neat.
Cutting it short, good job man.

Very nice  Welcome!

is that the integrated taillight of jsut the led one, you said both in the description  .

Great looking, and running I'm sure!!

Welcome

BTW, how do you like those NGK iridium plugs?

actually, I replaced the lens with a clear one, then changed the buld with one that is composed of 20-30 led's (can;t remember how much)

then I put in module that makes the blinking separatly on each side>>> left and righ buld ( you might notice that one buld is brighter on the right side, when turn signal is on).

I later found out it was not noticable unless you look directly at it, so I added licence plate turn signal!



about the plugs, it's hard to say, cause I did the jardine, rejet, lunchbox and plugs all at the same time. I was stunned by the power it gave to it.

now anywhere I go, I get looks and good comment about the sound of the jardine!

Did you have to cut holes in your fairings to put those frame sliders on?

Sweet looking bike. Bravo!

yup, must make a tiny hole in the fairing, about the size of a quarter!

I was hesitant at first, but it adds a certain look at it that I like alot!

but think about it, would you rather have a well cut hole hidden with a frame slider, or a big cracked or scratched fairing! just my opinion! 

Very true. so they bolt to the frame, or are these a weld on type? Ive been thinking I should get some, being a new rider with a new bike and all....

there is a replacement engine bar that need to be replaced, but it's very easy. Did it in 5 mins, and I know nothing or almost about mecanic. From there, you need to make the holes in the fairing, then just screw your frame sliders to the new bar!

here's the link from where I got it!

http://www.rg-racing.com/browseBike/Suzuki/GS500_FullyFaired/All_Years/CP0158BL.aspx


Some idiot driver once make it fall over while parking and left it there like that on the floor! I only got a minor bar end Protectors scratch, and frame slider slightly scratched too. But my bike was intact, god I was happy I had those on!

Thx for the link...I sent them an email since I live in the states. Need to see if theyll ship here without taking my first born! 

I live in canada, and they ship there, soo it shouldn't be a problem! a bit pricey... but they are the only one that offers them!

salut waiho from over here in Ontario.

nice bike indeed - I like how clean everything looks.  don't forget to mention the progrip 719's since you were listing the details.


ssinema, when ordering make sure to specify faired or naked version.  I'm not sure if there is actually a difference, but if I remember right when ordering mine, there were 2 different part numbers (mine are on a naked bike). 

dude!! your awsome, I didn't even realize I put those on till you reminded me!      you have a good eye

for some reason, I don'even see them anymore!