I have updated the top of the first post with current parts sold.

Lots of parts still for sale.

Bump.

Parts still for sale...

Katana rear wheel with 150/70 Bridgestone BT-023 with around 3500 miles
Stock front wheel with 110/70 Bridgestone S20 with around 3500 miles
Both were painted gloss black at the same time, had tires put on at the same time, and were installed at the same time

R6 Rear Shock
I have everything needed to install on a GS500

Drag Bars

Stock Rear wheel with worn-out Shinko tire in the stock dark gray color

DID X-Ring chain with non-rivet master link with 3500 miles
17 Tooth Sunstar 333 front sprocket
JTR 823-39  39 Tooth (stock ratio) rear sprocket
Chain and sprockets were all installed at the same time
Chain and sprockets are off the bike and ready to be boxed and shipped

Clear Titled frame

Set of rear EBC pads with ~1000 miles on them

Brand New set of Galfer front pads still in the plastic

Stock Rear Tail Light

Stock Luggage Bar/Handles  (I'm not really sure what these things are called)

Straight Front Forks

Exhaust
Stock headers/pipe
Welded on adapter to fit D&D slip-on
Slip-On repacked and riveted back together
Can was painted black with VHT Flame Proof and then Satin Clear with VHT Flame Proof
Ends and band are Chrome/Polished
Some rash on the band/clamp
Paint has been nicked on the can
Dent in one of the end caps that I wasn't able to straighten when I had it apart.  Doesn't affect performance or sound
The slip-on and pipes need to go together to fit a GS500

Lots of other parts.  I know the camshafts and buckets are good in the motor.  Frame is clean and clear titled.  If there is something else you need let me know and I will see if I have it.

How much would you want for the forks? Also potentially interested in the frame, but I'm sure it would be too unreasonable to ship. Thanks.

Quote from: GSRiderDad on December 03, 2014, 03:00:04 PM
How much would you want for the forks? Also potentially interested in the frame, but I'm sure it would be too unreasonable to ship. Thanks.

I sent you a PM.

Do you still have the front turn signals?

Quote from: kord_f on December 03, 2014, 04:18:36 PM
Do you still have the front turn signals?

I don't think so but I'll check to be sure.  I remember the bike came with one set but I can't remember if they were back or front.  I ended up replacing all 4 with smaller units.  Would you be interested in the rears if that's all I have?  They should work up front.

-Andy

Could you post a picture? I might be interested.

Quote from: kord_f on December 05, 2014, 01:49:12 PM
Could you post a picture? I might be interested.

Sorry it took me a couple days to get back with you.  I had to dig these out of my pile of parts.  I didn't realize one lens has some sort of milky stain on it.  It was like that when I got it.  I'm trying to get it off and restore the lens somewhat.  I'm pretty certain they are rear signals.

Let me know if you're interested at all and we can go from there.

Bump.

Parts still for sale.  I am updating my first post with everything sold.

Thanks!

PM sent

R6 shock still available?

Slug- I was the first guy who asked about the shock, to my knowledge it is still available. He offered a reasonable price but I decided to hold off on buying one until this summer when I'm home (long story). I have very mixed feelings about you wanting it (BACK OFF!), but I suppose I snoozed, I lose, so to speak.

I will try, maybe tomorrow, to get some pictures of the bike in its current state and pictures of some of the parts I have left.  Maybe that will give everyone a better idea of what I have left.

-Andy

I updated my first post with some new pictures and more specific dates and mileages.

Do you still have the cams? I need an intake cam.

Quote from: SmithvilleFlats on January 03, 2015, 09:47:47 AM
Do you still have the cams? I need an intake cam.

I do have both of the cams.  They are in really good shape as I had to buy one to replace a messed up intake cam.  It's not original to my bike; I think it came off a '96.

-Andy

Quote from: amkluttz on October 22, 2014, 05:58:04 AM
Parts Sold:

Tank
Left and Right Rear Fairings
Under Seat Pan
Flat Gauge Cluster
Petcock
Headlight & Fork Brackets
Sonic Springs
Motor Top End (Valves, Shims, & Buckets too)
Left & Right Fork Tubes
Fork Brace
Front Fender
Front Axle
Front Brake Pads
Clutch Perch, Handle, and Cable
Stock Gauge Cluster
R6 Rear Shock
Intake & Exhaust Cams



1999 GS500E
17,951 Miles


This is the bike in its current condition





The motor has something wrong with it. The exhaust is no longer stock.  I am planning to keep the turn signals, bar end mirrors, and the regulator/rectifier.  The rest would be up for grabs.

Katana rear wheel with 150/70 Bridgestone BT-023 with 3551 miles (put on bike 6/14/13)




Stock front wheel with 110/70 Bridgestone S20 with 3551 miles (put on bike 6/14/13)


Both were painted gloss black at the same time, had tires put on at the same time, and were installed at the same time



Drag Bars

Handlebar Controls



Stock Rear wheel with worn-out Shinko tire in the stock dark gray color

DID X-Ring chain with non-rivet master link with 3551 miles
17 Tooth Sunstar 333 front sprocket
JTR 823-39  39 Tooth (stock ratio) rear sprocket
Chain and sprockets were all installed at the same time
Chain and sprockets have been cleaned and lubed, are off the bike and ready to be boxed and shipped


Clear Titled frame

Set of rear EBC pads with ~1000 miles on them

Stock Rear Tail Light

Stock Luggage Bar/Handles  (I'm not really sure what these things are called)

Exhaust
Stock headers/pipe
Welded on adapter to fit D&D slip-on
Slip-On repacked and riveted back together
Can was painted black with VHT Flame Proof and then Satin Clear with VHT Flame Proof
Ends and band are Chrome/Polished
Some rash on the band/clamp
Paint has been nicked on the can
Dent in one of the end caps that I wasn't able to straighten when I had it apart.  Doesn't affect performance or sound
The slip-on and pipes need to go together to fit a GS500




Carburetor
Dynojet Kit set up for slip-on and K&N Filter
Has been looked over by The Buddha
[IMG]http://i1057.photobucket.com/albums/t394/amkluttz0819/Bike%20Pics/Su

Do you still have chain and sprockets

Quote from: Nikkoortiz on January 14, 2015, 01:15:02 PM
Do you still have chain and sprockets

I do.  I also responded to your PM.

-Andy